[center][/center]

[center][size=large]VIEW THE BEST SEX DOLL FEET GUIDE TODAY[/size][/center]

Standing Feet Vs Non-Standing Feet: What The Difference Means
Until the moment they need them, purchasers don't think about standing feet; then they find out the difference is gigantic. Small on the spec sheet, it still changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. An annoying purchase can be steered clear of in one of the simplest ways: comprehend the difference before you order.

Everything Follows From the Bolts
It's a simple difference at heart. Embedded in the soles of standing feet, metal bolts let the doll stand upright without support. Without these bolts, non-standing feet limit the doll to sitting or lying down, and trying to stand her will damage the feet. Whether the bolts are present decides everything else; they're the key.

Corners, Doorways and Anywhere Upright
Standing feet are critical for photography and display. If a doll can stand unaided, full-length poses without noticeable supports are possible, as is display in a corner, a doorway or anywhere else that needs her to be upright. Non-standing feet can't match the wide range of poses and settings this opens up, and it's the chief reason most photographers specify standing feet when ordering.

Standing Feet Are Also Essential for Showers
There's shower use as well, which makes standing feet essential. A shower with your doll only works if she can stand, as lying her down in one is both impractical and hazardous. Metal bolts make sure that the feet don't absorb water the way non-standing feet would; the standing feet also give her stability in a wet environment. Real safety is at stake, as water absorption in non-standing feet can lead to rust and eventual structural failure.

Hidden Rust Inside the Leg
Expanding on the shower use point is valuable; it's the source of a lot of damaged dolls. Inside the ankle of non-standing feet there's foam or filler material that absorbs water when it gets wet. It then rusts the metal skeleton inside the leg, which takes weeks or months to show, and once it's started it's basically unfixable. Nonetheless diligent you are, keep a doll with non-standing feet out of the shower, because the water will find its way in irrespective of your precautions.

Space-Efficient Storage
Another upside of standing feet is easier storage in some setups. With standing feet she can be stored upright in a corner, a wardrobe or a storage cabinet, without the need for a hanging hook or a storage case. Display rather than concealing her away is something this suits well, and it's space-efficient for buyers who don't have room for a hanging setup. With the standing feet, the doll can be stored noticeably and accessibly, which some purchasers prefer.

Is the Premium Worth Paying?
A drawback of standing feet: they're slightly more costly and somewhat heavier. A more involved manufacturing process plus a small amount of weight from the metal bolts means a price usually a few percent above a doll with non-standing feet. For buyers on a really tight budget it's worth knowing about, even though the difference is small and it's typically worth the additional cost.

The Other Disadvantage: Evident Bolts
The bolts can show if the feet are bare, which is the other downside. Distracting to some customers is the possibility that the bolts are evident in photos on a doll with high-heeled shoes or open-toed footwear. Because this minor aesthetic issue can be solved by covering the feet with closed shoes or opting for footwear that hides the bolts, it's not a reason to stay away from standing feet completely.

Non-Standing Feet: Cheaper and Lighter
Non-standing feet cost less and weigh less, and they suit purchasers who only want to use the doll in bed and won't display her standing or shower with her. Spending most of her life in a bed or on a sofa? Non-standing feet are perfectly sufficient, and the savings can go on upgrades such as articulated hands or a better wig. If you know what you want, this is a totally valid choice.

The Tactile Side of Non-Standing Feet
Non-standing feet are somewhat softer and more elastic too, and some buyers find that more comfortable to touch. Subtle as it is, and not typically enough to justify the choice on its own, the difference is worth knowing about if you're specifically looking for maximum softness. On non-standing dolls the feet feel more like the rest of the doll, not like they have a hard core inside them.

Permanent Damage to the Feet
Buyers sometimes forget what kind of feet they have and try to stand the doll regardless, which is the large risk with non-standing feet. The foam inside the ankle will tear or collapse under the doll's weight, since it can't support it, so this usual mistake causes real damage. You end up with a doll that can no longer stand even with your support, since the feet have been permanently damaged. If you're acquiring non-standing feet, remember that they're non-standing, and don't be tempted to test their limits.

Cutting Into the Feet Is Expensive and Risky
You might also ask whether standing feet can be retrofitted to a doll that doesn't have them. Briefly: no, and certainly not readily. New hardware has to be installed by cutting into the feet if you add the bolts later, and it's costly and often doesn't work as well as the original, since the bolts are embedded in the soles during manufacturing. Considering a doll without standing feet, and think you might want them later? Acquire a doll with standing feet in the first place; it's better than trying to add them later.

Useful Advice by Use Case
Direct is the practical advice for buyers opting for between standing and non-standing feet. You'll need standing feet for photographing the doll, displaying her standing, or employing her in the shower. Only want her in bed or on a sofa, and don't care about display? Non-standing feet are perfectly enough. Undecided purchasers are safer with standing feet, which restrict nothing and justify their small additional cost.

Lying Down Storage Needs More Space
We should mention a gender consideration as well. Because male dolls are heavier and more tough to store in any other way, they ordinarily get more from standing feet than female dolls do. There's no choice but to store a 45kg male doll that can't stand lying down, which puts pressure on the body and requires more space. For customers who don't have a lot of room, standing feet give male dolls the ability to store upright, which is a real benefit.

Softer, More Natural Non-Standing Feet
The aesthetic difference between standing and non-standing feet is worth a final note. On standing feet the bottom is marginally harder thanks to the bolts, and that can show when the doll is barefoot. Some purchasers consider it less aesthetically satisfying, notably with fragile features, because of the marginally industrial look of the hard soles. Non-standing feet are softer and more natural-looking, which some purchasers prefer. Barefoot photos being a priority makes this trade-off worth factoring into your decision, since it only matters if you're photographing the doll barefoot.

A Bolt That Falls Out Can Make the Doll Collapse
Consider the maintenance angle too. Look over the bolts on standing feet now and again to make sure they're secure; a loose bolt can damage the foot or ankle, and a lost bolt can cause the doll to collapse. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the suitable tool. Because non-standing feet have no hardware to come loose, they don't have this issue, and they're slightly lower-maintenance in the long run.

Grip and Stability
Another effect of the bolts is on how the doll stands on distinct surfaces. Carpet is where the bolts grip well and the doll is stable. Slipping bolts on hard flooring, especially if the floor is smooth, can mean the doll needs additional support to stay upright. A small mat or a grippy pad under the feet will avoid sliding on a hard surface, so consider one. A doll with non-standing feet isn't standing in the first place, so the issue doesn't arise; for standing feet on a hard floor, it's worth knowing about.

A Subtle Effect on Appearance
Last of all, and often overlooked, is how standing feet impact the doll's overall proportions. Somewhat changing the way the doll looks in barefoot photos is a possible effect of the small amount of length the bolts add to the foot. Usually invisible in shoes, this subtle effect is worth knowing about if you're planning to photograph the doll barefoot and you care about precise proportions. No bolts means no such effect with non-standing feet, whose feet are a little shorter and more natural-looking.

Posing, Display, Storage and Shower Options
The bottom line is that most customers get their money's worth from standing feet, because they open up posing, display, storage and shower choices that non-standing feet don't. The exception is the purchaser who's certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are the better choice for everyone else, and one of the simplest upgrades to justify. More info at this rosslink. Also check out check out the post right here bearing in mind article as well as have a look at this site bearing in mind browse around these guys together with internet not forgetting sites such as site here together with imp source not forgetting sites such as look what i found not forgetting sites such as explanation and try here for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]