[center][/center]

[center][size=large]DISCOVER THE BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: What To Pick And Why
Standing feet go unconsidered until they're needed, at which point purchasers discover the difference is enormous. The spec sheet gives it a line or less, but it changes what you can do with the doll, how she stores, how she photographs and how she wears over time. Knowing the difference before you order is among the simplest ways to dodge an irritating purchase.

Metal Bolts Embedded in the Soles
At its most basic, the difference is simple. Metal bolts embedded in the soles of standing feet permit the doll to stand upright without support. Non-standing feet don't have these bolts, which means the doll can only sit or lie down, and attempting to stand her will damage the feet. Present or absent, the bolts are the key, and everything else follows.

Upright Without Props
You need standing feet for photography and display. With a doll that can stand unaided you get full-length poses without evident supports and display in a corner, a doorway, or anywhere else that requires her to be upright. Most photographers specify standing feet when ordering for this main reason: it opens up a wide range of poses and settings that aren't possible with non-standing feet.

Showering and Standing Feet
Standing feet are also necessary for shower use. Want to shower with your doll? She has to be able to stand, since lying her down in a shower is impractical and dangerous. In a wet environment the standing feet give her stability, while the metal bolts ensure that the feet don't absorb water the way non-standing feet would. This is a real safety consideration, because water absorption in non-standing feet can lead to rust and eventual structural failure.

Never Shower a Non-Standing Doll
Worth expanding is the shower use point, as it's the source of a lot of damaged dolls. Inside the ankle of non-standing feet there's foam or filler material that absorbs water when it gets wet. The water then rusts the metal skeleton inside the leg, which takes weeks or months to become noticeable but is essentially unfixable once it starts. Never put a doll with non-standing feet in the shower, nonetheless cautious you are, since the water will find its way in anyway of your precautions.

Storing Her Standing Up
Standing feet bring easier storage, too, in some setups. A hanging hook or a storage case isn't needed for a doll with standing feet, who can be stored upright in a corner, a wardrobe, or a storage cabinet. It's a space-efficient option for purchasers without room for a hanging setup, and a great one for buyers who'd rather display the doll than keep her hidden. The doll can be stored in a way that's noticeable and accessible thanks to the standing feet, and some buyers prefer this.

What Standing Feet Cost
It's a drawback that standing feet are a little more costly and somewhat heavier. Expect the price to be a few percent higher than a doll with non-standing feet, as the metal bolts add a small amount of weight and the manufacturing process is more involved. For buyers on a really tight budget it's worth knowing about, even though the difference is small and it's usually worth the extra cost.

Choosing Footwear That Conceals Them
Bare feet can make the bolts apparent, which is the other drawback. If the doll wears high-heeled shoes or open-toed footwear, the bolts might be noticeable in photos, which some buyers find distracting. You can solve this slight aesthetic issue by covering the feet with closed shoes or selecting footwear that hides the bolts, so don't stay away from standing feet entirely because of it.

The Case for Non-Standing Feet
Cheaper and lighter, non-standing feet do the job for anyone who only wants to use the doll in bed and doesn't plan to display her standing or shower with her. For a doll who'll chiefly be on a bed or sofa, perfectly adequate non-standing feet free up cash for other upgrades, such as articulated hands or a better wig. A totally valid choice, this, for purchasers who know what they want.

What Non-Standing Feet Feel Like
Somewhat softer and more adaptable, non-standing feet are more comfortable to touch for some purchasers. Specifically looking for maximum softness? Then this subtle difference, though not normally enough to justify the choice on its own, is worth knowing about. The feet of non-standing dolls feel more like the rest of her and less as if there's a hard core inside.

Remember They're Non-Standing
The sizable risk? Purchasers forget what kind of feet they have and try to stand the doll regardless. Tear or collapse is what the foam inside the ankle does under the doll's weight, which is why this widespread mistake causes real damage. The result is a doll that can no longer stand even if you try to support her, because the feet have been permanently damaged. You're acquiring non-standing feet? Remember it, and don't be tempted to test their limits.

Decide Before You Order
There's also the question of whether standing feet can be retrofitted to a doll that doesn't have them. In short, no, not readily. New hardware has to be installed by cutting into the feet if you add the bolts subsequently, and it's pricey and often doesn't work as well as the original, since the bolts are embedded in the soles during manufacturing. Better than attempting to add them later is buying a doll with standing feet in the first place, if you're considering a doll without them and think you might want them later.

Standing Feet Don't Limit What You Can Do
The functional advice on choosing between standing and non-standing feet is uncomplicated. For photographing the doll, displaying her standing, or utilising her in the shower, you need standing feet. If it's only bed or sofa use you're after, and display is of no concern, non-standing feet are perfectly enough. For the unsure, standing feet are the safer choice; they leave you free to do whatever you like with the doll and are worth the small extra cost.

A Gender Consideration
Gender plays a part too, and it's worth mentioning. Male dolls tend to upside more than female dolls from standing feet, as they're heavier and more hard to store in any other way. Pressure on the body and more space are needed when a 45kg male doll that can't stand has to be stored lying down. With standing feet, male dolls can be stored upright, a real upside for customers who don't have a lot of room.

Industrial-Looking Soles on Delicate Dolls
The aesthetic difference between standing and non-standing feet deserves a final note. Because of the bolts, standing feet are a little harder at the bottom, which can be visible when the doll is barefoot. On dolls with fragile features in particular, some buyers find this less aesthetically pleasing, as the hard soles look a little industrial. The softer and more natural look of non-standing feet is what some purchasers prefer. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.

Maintenance: Check the Bolts Periodically
Consider the maintenance angle too. The bolts in standing feet need a periodic check to confirm they're secure, because the worst case is a bolt falling out entirely and the doll collapsing, with a loose one damaging the foot or ankle on the way there. Check every few months, by gently twisting the bolts, and tighten with the appropriate tool whichever feel loose. No hardware means nothing to come loose, so non-standing feet don't have this issue and are a little lower-maintenance in the long run.

Hard Flooring Can Be Slippery
The bolts have an effect, too, on how the doll stands on distinct surfaces. On carpet, the doll is stable, the bolts gripping well. Especially if the floor is silky, the bolts can slip on hard flooring, and the doll may need extra support to stay upright. Sliding is prevented on a hard surface by a small mat or a grippy pad under the feet, which you should consider. No issue with non-standing feet, as the doll isn't standing in the first place. Displaying a doll with standing feet on a hard floor is where it's worth knowing about.

How Standing Feet Change the Look
Last of all, and frequently overlooked, is how standing feet influence the doll's overall proportions. Marginally changing the way the doll looks in barefoot photos is a possible effect of the small quantity of length the bolts add to the foot. Subtle as the effect is, and typically invisible in shoes, it's worth knowing about if you plan to photograph the doll barefoot and care about specific proportions. A little shorter and more natural-looking, non-standing feet don't have this effect, since they don't have the bolts.

The Better Choice for Everyone Else
Standing feet are worth the additional cost for most customers, which is the bottom line, because they open up posing, display, storage and shower choices that non-standing feet don't. Purchasers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. Standing feet are better for everyone else, and they're among the simplest upgrades to justify. More info at this A No-BS Overview of Sex Dolls Today- What You Need to Know 9b9ac85 together with Your Ultimate Primer on Sex Dolls Today- Before You Spend a Penny and A No-BS Word on Sex Dolls Today- The Stuff That Matters. Also check out visit the site as well as see this website and read for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]