[center][/center]

[center][size=large]DISCOVER THE BEST SEX DOLL FEET ADVICE HERE[/size][/center]

Standing Feet Vs Non-Standing Feet: What The Difference Means
Few purchasers think about standing feet beforehand, yet the difference, once they need them, is gigantic. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Knowing the difference before you order is among the simplest ways to dodge an irritating purchase.

Everything Follows From the Bolts
There's an uncomplicated basic difference. Standing upright without support is possible because standing feet have metal bolts embedded in the soles. Non-standing feet lack these bolts, meaning the doll can only sit or lie down, with damage to the feet if you try to stand her. Everything else follows from whether the bolts are present or not, because the bolts are the key.

Standing Unaided
Photography and display are where standing feet are necessary. A doll that can stand unaided can be photographed in full-length poses without visible supports, and can be displayed in a corner, a doorway, or anywhere else that requires her to be upright. A wide range of poses and settings that aren't possible with non-standing feet opens up, and that's the principal reason most photographers specify standing feet when ordering.

Standing Feet Are Also Essential for Showers
There's shower use as well, which makes standing feet critical. If you want to shower with your doll, she must be able to stand, since laying her down in a shower is impractical as well as hazardous. Standing feet make her steady in a wet environment, and with the metal bolts the feet don't absorb water as non-standing feet would. Water absorption in non-standing feet can lead to rust and eventual structural failure, so this is a real safety consideration.

Water Rusts the Metal Skeleton
Worth expanding is the shower use point, as it's the source of a lot of damaged dolls. Inside the ankle of non-standing feet there's foam or filler material that absorbs water when it gets wet. Water rusting the metal skeleton inside the leg takes weeks or months to become visible, yet once it starts it's basically unfixable. Never put a doll with non-standing feet in the shower, nevertheless cautious you are, since the water will find its way in anyway of your precautions.

Noticeable and Accessible Storage
There's also easier storage with standing feet in some setups. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. Space-efficient, this suits buyers who don't have room for a hanging setup, and it's good for purchasers who want to display the doll rather than keep her hidden. Standing feet make evident and accessible storage possible, which suits some customers best.

A More Involved Manufacturing Process
Standing feet are slightly more costly and marginally heavier, which is their downside. The metal bolts add a small quantity of weight to the doll, and the manufacturing process is more involved, so the price is usually a few percent higher than a doll with non-standing feet. Buying on an extremely tight budget? The difference is small and usually worth the additional cost, but it's worth knowing about.

The Other Disadvantage: Visible Bolts
Another drawback is that the bolts can become noticeable if the feet are bare. On a doll with high-heeled shoes or open-toed footwear, the bolts might be evident in photos, which some customers find distracting. Cover the feet with closed shoes or select footwear that conceals the bolts and this trivial aesthetic issue is solved, so it's not a reason to avoid standing feet completely.

A Doll for the Bed or Sofa
Cheaper and lighter, non-standing feet do the job for anyone who only wants to use the doll in bed and doesn't plan to display her standing or shower with her. Most of her life in a bed or on a sofa means non-standing feet will be perfectly sufficient, and you can put the savings into other upgrades like articulated hands or a better wig. A totally valid choice, this, for purchasers who know what they want.

A Subtle Difference
Somewhat softer and more flexible, non-standing feet are more comfortable to touch for some purchasers. This is a subtle difference, and it's not ordinarily enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. Less like they have a hard core inside them and more like the rest of the doll is how the feet on non-standing dolls feel.

Attempting to Stand the Doll Anyway
Attempting to stand the doll anyway, after forgetting what kind of feet they have, is the sizable risk purchasers run with non-standing feet. Expect real damage from this common error, because the foam inside the ankle can't support the doll's weight and will tear or collapse. Even if you try to support her, the doll can no longer stand as a result, because the feet have been permanently damaged. You're acquiring non-standing feet? Remember it, and don't be tempted to test their limits.

The Short Answer Is No
And what about retrofitting standing feet to a doll that doesn't have them? Briefly: no, and definitely not easily. Adding the bolts afterwards needs cutting into the feet and installing new hardware, which is costly and frequently doesn't work as well as the original, because they're embedded in the soles during manufacturing. If you might want standing feet later, and you're considering a doll without them, acquiring a doll with standing feet in the first place beats trying to add them later.

Standing Feet Don't Limit What You Can Do
Straightforward is the practical advice for purchasers choosing between standing and non-standing feet. You need standing feet if you plan to photograph the doll, display her standing, or use her in the shower. If you only want to use her in bed or on a sofa, and you don't care about display, non-standing feet are perfectly adequate. The safer choose when you're undecided is standing feet; they limit nothing, and the small additional cost is worth it.

A 45kg Male Doll That Can't Stand
We should mention a gender consideration as well. Male dolls generally benefit from standing feet more than female dolls, because they're heavier and more difficult to store in any other way. Stored lying down, which puts pressure on the body and needs more space, is how a 45kg male doll that can't stand has to be kept. The ability to store upright is given to male dolls by standing feet, and that's a genuine advantage for buyers who don't have a lot of room.

Barefoot Photography Priorities
Worth a final note is the aesthetic difference between standing and non-standing feet. Marginally harder at the bottom is how standing feet are, because of the bolts, and it can be visible when the doll is barefoot. Some purchasers don't find this aesthetically pleasing, particularly on dolls with fragile features, since the hard soles look marginally industrial. The softer and more natural look of non-standing feet is what some customers prefer. Barefoot photos being a priority makes this trade-off worth factoring into your decision, since it only matters if you're photographing the doll barefoot.

No Hardware to Come Loose
Another angle worth considering is maintenance. Secure bolts matter: loose ones can damage the foot or the ankle, a bolt that falls out can cause a collapse, and so standing feet need periodic checking. A gentle twist of the bolts every few months checks them; if they feel loose, tighten them with the suitable tool. A little lower-maintenance in the long run, non-standing feet don't have this issue as there's no hardware to come loose.

How the Bolts Behave on Different Surfaces
Different surfaces mean different standing behaviour, and the bolts affect it. Carpet is where the bolts grip well and the doll is stable. Particularly if the floor is silky, the bolts can slip on hard flooring, and the doll may need extra support to stay upright. Putting a small mat or a grippy pad under the feet is worth considering on a hard surface, as it avoids sliding. The doll isn't standing in the first place with non-standing feet, so there's no issue there; with standing feet on a hard floor, it's worth knowing about.

The Final Consideration
The doll's overall proportions are impacted by standing feet, a final consideration that's regularly overlooked. The bolts add a small quantity of length to the foot, which can marginally change the way the doll looks in barefoot photos. You probably won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about precise proportions. Non-standing feet lack the bolts and hence this effect, leaving the feet a little shorter and more natural-looking.

Bed-Only Dolls Don't Need Them
Bottom line: for most buyers standing feet are worth the additional cost, opening up posing, display, storage and shower options that non-standing feet don't. The only customers who should skip them are those who are certain the doll will only be used in bed and won't be displayed or photographed standing. One of the simplest upgrades to justify, standing feet are the better choice for everyone else. More info at this rosslink. Also check out check these guys out for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]