[center][/center]

[center][size=large]DISCOVER BEST SEX DOLL FEET GUIDE TODAY[/size][/center]

Standing Feet Or Non-Standing Feet? The Differences Explained
Customers seldom think about standing feet before they need them, and once they do, the difference turns out to be vast. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Understanding the difference before you order is one of the simplest ways to stay away from a frustrating purchase.

Attempting to Stand Her Will Damage the Feet
At its most basic, the difference is simple. Standing feet have metal bolts embedded in the soles, which allow the doll to stand upright without support. These bolts are absent from non-standing feet, so the doll can only sit or lie down, and attempting to stand her will damage the feet. Are the bolts there or not? That's the key, and everything else follows from it.

Why Photographers Specify Standing Feet
Standing feet are crucial for photography and display. Photographed in full-length poses without evident supports, and displayed in a corner, a doorway or anywhere else that needs her upright: that's what a doll that can stand unaided can do. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the principal reason most photographers specify standing feet when ordering.

Why Showers Demand Standing Feet
Standing feet are necessary for the shower as well. If you want to shower with your doll, she needs to be able to stand, because lying her down in a shower is both impractical and hazardous. A wet environment is no difficulty for stability with standing feet, and the metal bolts ensure the feet don't absorb water the way non-standing feet would. It's a genuine safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.

Water Will Find Its Way In
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. Foam or filler material sits inside the ankle of non-standing feet, and it absorbs water when it gets wet. From there the water rusts the metal skeleton inside the leg, taking weeks or months to become visible and being essentially unfixable once it starts. Because the water will find its way in irrespective of your precautions, a doll with non-standing feet should never be in the shower, no matter how attentive you are.

Standing Feet Make Storage Easier
Easier storage is another thing standing feet offer in some setups. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. Buyers who want to display the doll rather than keep her hidden will find this a decent alternative, and it's space-efficient if you don't have room for a hanging setup. The standing feet make it possible to store the doll in a way that's apparent and accessible, which some customers prefer.

A Few Percent More Expensive
A disadvantage of standing feet: they're marginally more expensive and slightly heavier. A more involved manufacturing process plus a small amount of weight from the metal bolts means a price usually a few percent above a doll with non-standing feet. For buyers on an extremely tight budget it's worth knowing about, even though the difference is small and it's typically worth the extra cost.

Closed Shoes Hide the Bolts
The bolts can become visible if the feet are bare, and that's the other drawback. Distracting to some buyers is the possibility that the bolts are noticeable in photos on a doll with high-heeled shoes or open-toed footwear. Cover the feet with closed shoes or choose footwear that conceals the bolts and this trivial aesthetic issue is solved, so it's not a reason to avoid standing feet completely.

A Doll for the Bed or Sofa
Non-standing feet are cheaper and lighter, and they're fine for customers who only want to use the doll in bed and don't plan to display her standing or shower with her. Where most of her life will be spent in a bed or on a sofa, non-standing feet are perfectly adequate and leave money for upgrades like articulated hands or a better wig. Nothing mistaken with this choice for customers who know what they want; it's totally valid.

What Non-Standing Feet Feel Like
Some customers find non-standing feet more comfortable to touch, being somewhat softer and more adaptable. Subtle as it is, and not usually enough to justify the choice on its own, the difference is worth knowing about if you're specifically looking for maximum softness. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.

Foam in the Ankle Can't Take the Weight
Trying to stand the doll anyway, after forgetting what kind of feet they have, is the huge risk customers run with non-standing feet. This is a common mistake, and it causes genuine damage, because the foam inside the ankle can't support the doll's weight and will tear or collapse. Even if you try to support her, the doll can no longer stand as a result, because the feet have been permanently damaged. Resist the temptation to test the limits of non-standing feet, and remember that they're non-standing, if you're buying them.

Can Standing Feet Be Retrofitted?
Another question is whether standing feet can be retrofitted to a doll that doesn't have them. To put it briefly, not readily, no. Adding the bolts afterwards requires cutting into the feet and installing new hardware, which is pricey and often doesn't work as well as the original, because they're embedded in the soles during manufacturing. If you might want standing feet later, and you're considering a doll without them, purchasing a doll with standing feet in the first place beats attempting to add them later.

Which Feet Should You Order?
Deciding between standing and non-standing feet comes with uncomplicated useful advice. Photographing the doll, displaying her standing, or employing her in the shower? Then you need standing feet. Only want her in bed or on a sofa, and don't care about display? Non-standing feet are perfectly enough. The safer opt for when you're undecided is standing feet; they limit nothing, and the small extra cost is worth it.

Pressure on the Body When Lying Down
There's also a gender consideration worth mentioning. Male dolls are heavier and harder to store in any other way, so they typically upside from standing feet more than female dolls. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and requires more space. Standing feet give male dolls the ability to store upright, which is a genuine advantage for purchasers who don't have a lot of room.

A Final Note on Appearance
To finish, the aesthetic difference between standing and non-standing feet is worth noting. With the doll barefoot, the somewhat harder bottom of standing feet, down to the bolts, can be apparent. Some customers consider it less aesthetically pleasing, particularly with delicate features, because of the somewhat industrial look of the hard soles. Non-standing feet are more natural-looking and softer, something some customers prefer. Barefoot photos being a priority makes this trade-off worth factoring into your decision, since it only matters if you're photographing the doll barefoot.

Non-Standing Feet Are Lower-Maintenance
A maintenance angle is also worth considering. Periodic checks keep standing feet safe, given that a loose bolt can damage the foot or the ankle and a bolt falling out entirely can cause the doll to collapse. Check the bolts every few months by gently twisting them, and if they feel loose, tighten them with the appropriate tool. In the long run non-standing feet are marginally lower-maintenance, since there's no hardware to come loose and so no such issue.

A Small Mat or Grippy Pad
Distinct surfaces mean distinct standing behaviour, and the bolts impact it. Grip is good on carpet, and the doll is steady. Bolts can slip on hard flooring, notably a silky floor, so the doll may need extra support to stay upright. To stop sliding on a hard surface, consider a small mat or a grippy pad beneath the feet. No issue with non-standing feet, as the doll isn't standing in the first place. Displaying a doll with standing feet on a hard floor is where it's worth knowing about.

An Overlooked Detail: Proportions
There's a final consideration that's frequently overlooked, which is how standing feet affect the doll's overall proportions. A small amount of length is added to the foot by the bolts, which can marginally change the way the doll looks in barefoot photos. Subtle as the effect is, and usually invisible in shoes, it's worth knowing about if you plan to photograph the doll barefoot and care about exact proportions. The feet are marginally shorter and more natural-looking on non-standing feet, which don't have this effect because they don't have the bolts.

One of the Simplest Upgrades to Justify
What it comes down to is that most buyers will find standing feet worth the extra cost, since they open up posing, display, storage, and shower choices that non-standing feet don't. Purchasers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. Standing feet are the better choice for everyone else, and one of the simplest upgrades to justify. More info at this A Quick Lowdown on Sex Dolls Right Now- What Nobody Tells You 4_18c31 together with The Full Guide to Sex Dolls- What Nobody Tells You and The No-Nonsense Lowdown on Sex Dolls- The Truth. Also check out additional info for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]