[center]
[/center] [center][size=large]SEE THE BEST SEX DOLL FEET ADVICE HERE[/size][/center]
Standing Feet Or Non-Standing Feet? The Differences Explained
Standing feet go unconsidered until they're needed, at which point purchasers discover the difference is immense. A small detail on the spec sheet, sure, but it changes how the doll stores, photographs and wears over time, as well as what you can do with her. Understanding the difference before you order is one of the simplest ways to stay away from an irritating purchase.
Metal Bolts Embedded in the Soles
Straightforward is the basic difference. The doll can stand upright without support because standing feet have metal bolts embedded in the soles. Damage to the feet is the result of attempting to stand a doll with non-standing feet, which don't have these bolts and so only permit sitting or lying down. Everything else follows from whether the bolts are present or not, because the bolts are the key.
Upright Without Props
Important for photography and display: standing feet. A doll that stands unaided can be photographed full-length with no evident supports, and displayed in a corner, a doorway, or anywhere else she needs to be upright. Poses and settings in a wide range become possible, which non-standing feet rule out, and most photographers specify standing feet when ordering for exactly that reason.
Stability in a Wet Environment
Shower use is another thing for which standing feet are crucial. It's impractical and risky to lie her down in a shower, which is why a doll for showering with needs to be able to stand. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. The real safety consideration is that water absorption in non-standing feet can lead to rust and eventual structural failure.
No Precaution Is Enough
Because it's the source of a lot of damaged dolls, the shower use point is worth expanding. Water gets absorbed by the foam or filler material inside the ankle of non-standing feet when it gets wet. From there the water rusts the metal skeleton inside the leg, taking weeks or months to become evident and being basically unfixable once it starts. Because the water will find its way in anyway of your precautions, a doll with non-standing feet should never be in the shower, no matter how cautious you are.
Display Rather Than Hide
In some setups, a doll with standing feet is also easier to store. With standing feet she can be stored upright in a corner, a wardrobe or a storage cabinet, without the need for a hanging hook or a storage case. It's a space-efficient choice for purchasers without room for a hanging setup, and a decent one for buyers who'd rather display the doll than keep her hidden. Preferred by some buyers is the noticeable and accessible storage that standing feet make possible.
A Few Percent More Expensive
On the drawback, standing feet are somewhat more pricey and somewhat heavier. Why the premium? The metal bolts add a small amount of weight to the doll, manufacturing is more involved, and the price ordinarily ends up a few percent higher than a doll with non-standing feet. The additional cost is usually worth it and the difference is small, but a very tight budget makes it worth knowing about.
Opting for Footwear That Conceals Them
The second downside is that bare feet can show the bolts. High-heeled shoes or open-toed footwear on a doll can leave the bolts visible in photos, which some buyers find distracting. This is a small aesthetic issue, and it can be solved by covering the feet with closed shoes or by choosing footwear that hides the bolts, so it's not a reason to avoid standing feet totally.
Know What You Want
Purchasers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. Articulated hands or a better wig could be paid for with the savings, and non-standing feet are perfectly acceptable for a doll who mostly lives in a bed or on a sofa. Where buyers know what they want, this is an entirely valid choice.
Softness as a Selling Point
There's a small softness and flexibility to non-standing feet that some buyers find more comfortable to touch. Not typically enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. The feet of non-standing dolls feel more like the rest of her and less as if there's a hard core inside.
A Doll That Can No Longer Stand
It's the forgetful customer who trips up on non-standing feet, attempting to stand the doll anyway; that's the sizable risk. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's genuine damage from a common mistake. Result: permanently damaged feet, and a doll that can no longer stand, even with your support. Buying non-standing feet? Remember they're non-standing, and don't be tempted to test their limits.
If You Might Want Them Later
Whether standing feet can be retrofitted to a doll that doesn't have them is another question. Short answer: no, not easily. Embedded in the soles during manufacturing, the bolts can only be added later by cutting into the feet and installing new hardware, which is pricey and frequently doesn't work as well as the original. Buy a doll with standing feet in the first place, rather than trying to add them later, if you're considering a doll without them and think you might want them later.
Bed or Sofa Only: Non-Standing Is Fine
The functional advice for buyers picking between standing and non-standing feet is uncomplicated. You need standing feet if you plan to photograph the doll, display her standing, or use her in the shower. Only want her in bed or on a sofa, and don't care about display? Non-standing feet are perfectly enough. Undecided purchasers are safer with standing feet, which restrict nothing and justify their small extra cost.
Room for Storage Is a Real Concern
A gender consideration is also worth mentioning. Because they're heavier and more tricky to store in any other way, male dolls generally upside from standing feet more than female dolls. Storage lying down, which puts pressure on the body and needs more space, is the only option for a 45kg male doll that can't stand. The ability to store upright is given to male dolls by standing feet, and that's a genuine upside for buyers who don't have a lot of room.
A Trade-Off That Matters for Barefoot Photos
Worth a final note is the aesthetic difference between standing and non-standing feet. Noticeable when the doll is barefoot can be the minor hardness at the bottom of standing feet, which the bolts cause. The hard soles look somewhat industrial, so some buyers find this less aesthetically satisfying, especially on dolls with delicate features. Some customers prefer non-standing feet, which are softer and more natural-looking. Only if you're photographing the doll barefoot does this trade-off matter, and it's worth factoring into your decision if barefoot photos are a priority.
Maintenance: Check the Bolts Periodically
Consider the maintenance angle too. Standing feet need to be checked periodically to make sure the bolts are secure, because a loose bolt can damage the foot or the ankle, and a bolt that falls out totally can cause the doll to collapse. A soft twist of the bolts every few months checks them; if they feel loose, tighten them with the suitable tool. The issue doesn't arise with non-standing feet, which have no hardware to come loose, making them marginally lower-maintenance in the long run.
A Small Mat or Grippy Pad
Different surfaces change how the doll stands, thanks to the bolts. The doll is stable on carpet, where the bolts grip well. The doll may need extra support to stay upright on hard flooring, where the bolts can slip, especially if the floor is silky. On a hard surface, consider using a small mat or a grippy pad under the feet to avoid sliding. A doll with non-standing feet isn't standing in the first place, so the issue doesn't arise; for standing feet on a hard floor, it's worth knowing about.
If You Care About Exact Proportions
Last of all, and frequently overlooked, is how standing feet affect the doll's overall proportions. The bolts add a small amount of length to the foot, which can marginally change the way the doll looks in barefoot photos. It's a subtle effect that's typically invisible in shoes, yet worth knowing about for barefoot photography when you care about exact proportions. Lacking the bolts, non-standing feet steer clear of this effect and are marginally shorter and more natural-looking.
The Bottom Line: Standing Feet Are Worth It
Most customers should find standing feet worth the additional cost; they open up posing, display, storage, and shower alternatives that non-standing feet don't. That's the bottom line. Nobody should skip them unless they're certain the doll will only be used in bed and won't be displayed or photographed standing. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out visit this web-site not forgetting sites such as learn this here now together with his response alongside all additional info together with content as well as click here for more not forgetting sites such as bonuses and don't forget continue reading this which is worth considering with try these out and check that for more.
[center]
[/center] [center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]