[center][/center]

[center][size=large]DISCOVER THE BEST SEX DOLL FEET ADVICE TODAY[/size][/center]

Standing Feet Or Non-Standing Feet? The Differences Explained
Until the moment they need them, purchasers don't think about standing feet; then they find out the difference is gigantic. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. One of the simplest ways to avoid a frustrating purchase is to comprehend the difference before you order.

Metal Bolts Embedded in the Soles
The basic difference is simple. Without support, a doll with standing feet can stand upright, thanks to the metal bolts embedded in the soles. These bolts are absent from non-standing feet, so the doll can only sit or lie down, and trying to stand her will damage the feet. Are the bolts there or not? That's the key, and everything else follows from it.

The Photographer's Choice
Essential for photography and display: standing feet. Anywhere that needs her to be upright, including a corner or a doorway, can display a doll that can stand unaided, and she can be photographed in full-length poses without visible supports. Non-standing feet can't match the wide range of poses and settings this opens up, and it's the chief reason most photographers specify standing feet when ordering.

Lying Her Down in a Shower Is Impractical and Dangerous
Shower use makes standing feet critical too. She needs to stand if the plan is a shower together, because a doll lying down in a shower is impractical and hazardous. The feet don't absorb water the way non-standing feet would, because the metal bolts ensure that, and the standing feet give her stability in a wet environment. It's a real safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.

Water Rusts the Metal Skeleton
The shower use point is worth expanding, because it's the source of a lot of damaged dolls. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become noticeable but is fundamentally unfixable once it starts. A doll with non-standing feet shouldn't ever be in the shower: the water will find its way in regardless of your precautions, no matter how attentive you are.

Standing Feet Make Storage Easier
Standing feet bring easier storage, too, in some setups. Upright storage in a corner, a wardrobe, or a storage cabinet is possible for a doll with standing feet, and no hanging hook or storage case is needed. Buyers who don't have room for a hanging setup will find this a space-efficient choice, and it suits purchasers who want to display the doll rather than keep her hidden. With the standing feet, the doll can be stored visibly and accessibly, which some purchasers prefer.

Metal Bolts Add Weight
On the downside, standing feet are somewhat more costly and a little heavier. Slightly more weight comes from the metal bolts, and the more involved manufacturing process pushes the cost normally a few percent above a doll with non-standing feet. The difference is small, and it's typically worth the extra cost, but it's worth knowing about if you're buying on an extremely tight budget.

Solving the Visible Bolt Problem
The second downside is that bare feet can show the bolts. On a doll with high-heeled shoes or open-toed footwear, the bolts might be apparent in photos, which some buyers find distracting. You can solve this trivial aesthetic issue by covering the feet with closed shoes or opting for footwear that hides the bolts, so don't steer clear of standing feet completely because of it.

A Completely Valid Choice
Fine for purchasers who only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are also cheaper and lighter. Where most of her life will be spent in a bed or on a sofa, non-standing feet are perfectly enough and leave money for upgrades like articulated hands or a better wig. If you know what you want, this is a totally valid choice.

Not Enough to Decide on Its Own
Non-standing feet are a little softer and more pliable too, and some purchasers find that more comfortable to touch. Specifically looking for maximum softness? Then this subtle difference, though not normally enough to justify the choice on its own, is worth knowing about. On non-standing dolls the feet feel more like the rest of the doll, not like they have a hard core inside them.

Remember They're Non-Standing
Purchasers at times forget what kind of feet they have and attempt to stand the doll anyway, which is the big risk with non-standing feet. This common slip-up causes real damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. Result: permanently damaged feet, and a doll that can no longer stand, even with your support. If non-standing feet are what you're acquiring, remember that they're non-standing and don't test their limits.

New Hardware Rarely Works as Well
Then there's the question of whether standing feet can be retrofitted to a doll without them. Short answer: no, not readily. Adding the bolts afterwards requires cutting into the feet and installing new hardware, which is costly and often doesn't work as well as the original, because they're embedded in the soles during manufacturing. If you're considering buying a doll without standing feet, and you think you might want them later, it's better to purchase a doll with standing feet in the first place than to attempt to add them later.

Standing Feet Don't Limit What You Can Do
For customers who are picking between standing and non-standing feet, the practical advice is uncomplicated. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. Non-standing feet are perfectly enough if you only want to use her in bed or on a sofa and you don't care about display. Unsure which to select? The small extra cost of standing feet buys you the safer alternative, with no limit on what the doll can do.

A 45kg Male Doll That Can't Stand
There's a gender consideration as well that's worth mentioning. Heavier, and more difficult to store in any other way, male dolls typically upside from standing feet more than female dolls. Pressure on the body and more space are needed when a 45kg male doll that can't stand has to be stored lying down. Standing feet give male dolls the ability to store upright, which is a genuine benefit for customers who don't have a lot of room.

A Final Note on Appearance
Worth a final note is the aesthetic difference between standing and non-standing feet. With the doll barefoot, the somewhat harder bottom of standing feet, down to the bolts, can be visible. Dolls with fragile features especially suffer, some customers feel, because the hard soles look marginally industrial and less aesthetically pleasing. Some customers prefer non-standing feet, which are softer and more natural-looking. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

The Maintenance Angle
There's also a maintenance angle that's worth considering. Periodic checks keep standing feet safe, given that a loose bolt can damage the foot or the ankle and a bolt falling out completely can cause the doll to collapse. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the suitable tool. Slightly lower-maintenance in the long run, non-standing feet don't have this issue as there's no hardware to come loose.

Stopping Sliding
Different surfaces mean different standing behaviour, and the bolts influence it. On carpet, the doll is stable, the bolts gripping well. Hard flooring can make the bolts slip, particularly if the floor is silky, so the doll may need extra support to stay upright. Sliding on a hard surface? A small mat or grippy pad under the feet avoids it. No issue with non-standing feet, as the doll isn't standing in the first place. Displaying a doll with standing feet on a hard floor is where it's worth knowing about.

Barefoot Photos and Exact Proportions
How standing feet impact the doll's overall proportions is a final consideration that's frequently overlooked. The way the doll looks in barefoot photos can somewhat change, as the bolts add a small quantity of length to the foot. This subtle effect, normally invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about specific proportions. Without the bolts, non-standing feet don't have this effect, and the feet are somewhat shorter and more natural-looking.

Opt for Standing Unless You're Certain
Posing, display, storage and shower options that non-standing feet don't offer are opened up by standing feet, and the bottom line is that they're worth the additional cost for most purchasers. You're safe to skip them only when you're certain the doll will only be used in bed and won't be displayed or photographed standing. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out website together with investigate this site and more information for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]