[center][/center]

[center][size=large]DISCOVER THE BEST SEX DOLL FEET GUIDE HERE[/size][/center]

Understanding Standing Feet Vs Non-Standing Feet On A Sex Doll
It's only when buyers need standing feet that they notice them, and the difference is enormous. What you can do with her, how she stores, how she photographs and how she wears over time: a small spec sheet detail changes all of it. To avoid an irritating purchase, understand the difference before you order; it's one of the simplest ways.

The Difference Explained Simply
At its most basic, the difference is uncomplicated. Standing feet come with metal bolts embedded in the soles, and these permit the doll to stand upright without support. Non-standing feet lack these bolts, meaning the doll can only sit or lie down, with damage to the feet if you attempt to stand her. Everything else follows from whether the bolts are present or not, because the bolts are the key.

Corners, Doorways and Anywhere Upright
Photography and display are where standing feet are necessary. Unaided standing means full-length poses without evident supports, and display in a corner, a doorway, or anywhere else that needs her to be upright. Poses and settings in a wide range become possible, which non-standing feet rule out, and most photographers specify standing feet when ordering for precisely that reason.

Showering and Standing Feet
If you want shower use, standing feet are essential as well. Lying her down in a shower is impractical and risky, so showering with your doll means she needs to stand. Stability in a wet environment comes from the standing feet, and the metal bolts make sure that the feet don't absorb water the way non-standing feet would. This is a real safety consideration, because water absorption in non-standing feet can lead to rust and eventual structural failure.

No Precaution Is Enough
Worth expanding is the shower use point, as it's the source of a lot of damaged dolls. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. Rust follows as the water attacks the metal skeleton inside the leg; it takes weeks or months to become visible, but it's essentially unfixable once it starts. A doll with non-standing feet shouldn't ever be in the shower: the water will find its way in anyway of your precautions, no matter how diligent you are.

Space-Efficient Storage
Some setups make standing feet easier to store as well. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. It's a space-efficient option for customers without room for a hanging setup, and a solid one for buyers who'd rather display the doll than keep her hidden. Standing feet make evident and accessible storage possible, which suits some customers best.

Is the Premium Worth Paying?
Their disadvantage is simply being a little more costly and marginally heavier. Price-wise, a doll with standing feet is typically a few percent higher than one with non-standing feet; the metal bolts add a small amount of weight and manufacturing is more involved. It's worth knowing about if you're acquiring on an extremely tight budget, though the difference is small and normally worth the extra cost.

Distracting in Photos
Another drawback is that the bolts can become noticeable if the feet are bare. If the doll wears high-heeled shoes or open-toed footwear, the bolts might be apparent in photos, which some customers find distracting. You can solve this small aesthetic issue by covering the feet with closed shoes or choosing footwear that conceals the bolts, so don't stay away from standing feet completely because of it.

The Case for Non-Standing Feet
Cheaper and lighter, non-standing feet do the job for anyone who only wants to use the doll in bed and doesn't plan to display her standing or shower with her. Where most of her life will be spent in a bed or on a sofa, non-standing feet are perfectly enough and leave money for upgrades like articulated hands or a better wig. Nothing incorrect with this choice for purchasers who know what they want; it's entirely valid.

The Tactile Side of Non-Standing Feet
Somewhat softer and more elastic, non-standing feet are more comfortable to touch for some customers. A subtle difference, not normally enough to justify the choice on its own, this is still worth knowing about if you're specifically looking for maximum softness. Non-standing dolls' feet feel like the rest of the doll more than like they have a hard core inside them.

The Big Risk With Non-Standing Feet
Purchasers forgetting what kind of feet they have and trying to stand the doll anyway is the large risk with non-standing feet. The foam inside the ankle will tear or collapse under the doll's weight, since it can't support it, so this typical oversight causes genuine damage. Even if you attempt to support her, the doll can no longer stand as a result, because the feet have been permanently damaged. Non-standing feet should be remembered as non-standing, and their limits shouldn't be tested.

New Hardware Rarely Works as Well
Whether standing feet can be retrofitted to a doll that doesn't have them is another question. Not easily; that's the short answer. New hardware has to be installed by cutting into the feet if you add the bolts afterwards, and it's costly and frequently doesn't work as well as the original, since the bolts are embedded in the soles during manufacturing. You might want them later if you're considering acquiring a doll without standing feet; in that case, it's better to acquire a doll with standing feet in the first place than to try to add them later.

Sensible Advice by Use Case
The functional advice on picking between standing and non-standing feet is simple. For photographing the doll, displaying her standing, or using her in the shower, you need standing feet. If you only want to use her in bed or on a sofa, and you don't care about display, non-standing feet are perfectly acceptable. Unsure which to pick? The small extra cost of standing feet acquires you the safer choice, with no limit on what the doll can do.

Pressure on the Body When Lying Down
A gender consideration is also worth mentioning. Heavier, and more hard to store in any other way, male dolls ordinarily upside from standing feet more than female dolls. A 45kg male doll that can't stand has to be stored lying down, and that puts pressure on the body and needs more space. A real benefit for buyers who don't have a lot of room is that standing feet give male dolls the ability to store upright.

Barefoot Photography Priorities
There's a final note to make on the aesthetic difference between standing and non-standing feet. Standing feet are slightly harder at the bottom, because of the bolts, and this can be noticeable when the doll is barefoot. The hard soles look a little industrial, so some buyers find this less aesthetically gratifying, particularly on dolls with delicate features. Non-standing feet are more natural-looking and softer, something some customers prefer. Photographing the doll barefoot is the only time this trade-off matters, and it's worth factoring into your decision if barefoot photos are a priority.

Maintenance: Check the Bolts Periodically
There's also a maintenance angle that's worth considering. Periodic checks keep standing feet safe, given that a loose bolt can damage the foot or the ankle and a bolt falling out completely can cause the doll to collapse. By gently twisting the bolts every few months you can check them, and if they feel loose, use the fitting tool to tighten them. With no hardware to come loose, non-standing feet stay away from this issue and are slightly lower-maintenance in the long run.

Preventing Sliding
The bolts have an effect, too, on how the doll stands on distinct surfaces. Carpet suits the bolts, which grip well, leaving the doll stable. Extra support to stay upright may be needed on hard flooring, as the bolts can slip, particularly on a silky floor. On hard surfaces, a small mat or a grippy pad under the feet is worth considering to avoid sliding. This is worth knowing about if you plan to display a doll with standing feet on a hard floor. Non-standing feet don't have the issue, because the doll isn't standing in the first place.

Barefoot Photos and Exact Proportions
The doll's overall proportions are impacted by standing feet, a final consideration that's often overlooked. In barefoot photos, the way the doll looks can be marginally changed by the small amount of length the bolts add to the foot. It's a subtle effect that's ordinarily invisible in shoes, yet worth knowing about for barefoot photography when you care about exact proportions. No bolts means no such effect with non-standing feet, whose feet are somewhat shorter and more natural-looking.

The Bottom Line: Standing Feet Are Worth It
The additional cost of standing feet is worth it for most purchasers, because they open up posing, display, storage and shower choices that non-standing feet don't; that's the bottom line. Certain the doll will only ever be used in bed, and never displayed or photographed standing? Then skip them. Nobody else should. Everyone else should select standing feet, which are the better choice and one of the simplest upgrades to justify. More info at this rosslink. Also check out wikipedia reference for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]