[center][/center]

[center][size=large]SEE THE BEST SEX DOLL FEET GUIDE HERE[/size][/center]

What Are Standing Feet? Standing Vs Non-Standing Feet Explained
Standing feet go unconsidered until they're needed, at which point buyers discover the difference is enormous. A small detail on the spec sheet, sure, but it changes how the doll stores, photographs and wears over time, as well as what you can do with her. Grasp the difference before ordering and you'll have avoided an annoying purchase in one of the simplest ways possible.

The Bolts Are the Key
Uncomplicated is the basic difference. With standing feet, metal bolts are embedded in the soles, letting the doll stand upright without support. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and trying to stand her will damage the feet. Having the bolts or not is the key, and everything else follows from that.

Corners, Doorways and Anywhere Upright
Necessary for photography and display: standing feet. Photographed in full-length poses without evident supports, and displayed in a corner, a doorway or anywhere else that needs her upright: that's what a doll that can stand unaided can do. Poses and settings in a wide range become possible, which non-standing feet rule out, and most photographers specify standing feet when ordering for exactly that reason.

Metal Bolts Keep Water Out of the Feet
Showering is another case where standing feet are important. Lying her down in a shower is impractical and hazardous, so showering with your doll means she needs to stand. A wet environment is no complication for stability with standing feet, and the metal bolts ensure the feet don't absorb water the way non-standing feet would. Rust and eventual structural failure can follow from water absorption in non-standing feet, which makes this a real safety consideration.

Hidden Rust Inside the Leg
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. Non-standing feet include foam or filler material inside the ankle, and wet conditions make that material absorb water. Water rusting the metal skeleton inside the leg takes weeks or months to become visible, yet once it starts it's basically unfixable. The water will find its way in irrespective of your precautions, so a doll with non-standing feet should never be in the shower, no matter how cautious you are.

Standing Feet Make Storage Easier
Standing feet can make storage easier as well, depending on the setup. Stored upright in a corner, a wardrobe or a storage cabinet, a doll with standing feet doesn't need a hanging hook or a storage case. Space-efficient, this suits purchasers who don't have room for a hanging setup, and it's solid for customers who want to display the doll rather than keep her hidden. Storing the doll in a way that's evident and accessible is possible with standing feet, and some purchasers prefer that.

Extremely Tight Budgets and Standing Feet
The disadvantage of standing feet is that they're marginally more costly and marginally heavier. Slightly more weight comes from the metal bolts, and the more involved manufacturing process pushes the cost typically a few percent above a doll with non-standing feet. Though the difference is small and it's usually worth the additional cost, knowing about it matters if you're buying on a really tight budget.

The Other Disadvantage: Noticeable Bolts
Another disadvantage is that the bolts can become apparent if the feet are bare. With high-heeled shoes or open-toed footwear, the bolts might be apparent in photos, something some customers find distracting. No reason to steer clear of standing feet totally, since this trivial aesthetic issue can be solved with closed shoes or footwear that conceals the bolts.

Perfectly Adequate for Many Buyers
Buyers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. A doll that lives largely in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. This choice is completely valid for purchasers who know what they want.

Comfortable to Touch
There's a slight softness and flexibility to non-standing feet that some buyers find more comfortable to touch. Subtle as it is, and not generally enough to justify the choice on its own, the difference is worth knowing about if you're specifically looking for maximum softness. The feet on non-standing dolls feel less like they have a hard core inside them, and more like the rest of the doll.

A Common and Costly Mistake
Purchasers occasionally forget what kind of feet they have and attempt to stand the doll regardless, which is the big risk with non-standing feet. This is a common slip-up, and it causes genuine damage, because the foam inside the ankle can't support the doll's weight and will tear or collapse. A doll that can no longer stand, even if you attempt to support her, is the result, because the feet have been permanently damaged. When you acquire non-standing feet, remember what they are and don't be tempted to test their limits.

Decide Before You Order
A further question is whether a doll that doesn't have standing feet can have them retrofitted. The short answer is that it can't readily be done. Because the bolts are embedded in the soles during manufacturing, adding them afterwards means cutting into the feet and installing new hardware, an expensive process that frequently doesn't work as well as the original. When you think you might want standing feet later and you're considering a doll without them, it's better to purchase a doll with standing feet first than attempt to add them later.

Bed or Sofa Only: Non-Standing Is Fine
Customers selecting between standing and non-standing feet can follow some direct practical advice. You'll need standing feet for photographing the doll, displaying her standing, or employing her in the shower. If display doesn't matter and you only want to use her in bed or on a sofa, non-standing feet are perfectly sufficient. Standing feet make sense if you're not sure: they don't restrict what you can do with the doll, and they're worth the small extra cost.

Pressure on the Body When Lying Down
A gender consideration deserves a mention as well. Because male dolls are heavier and more difficult to store in any other way, they broadly get more from standing feet than female dolls do. If a 45kg male doll can't stand, he has to be stored lying down, which puts pressure on the body and requires more space. For purchasers who don't have a lot of room, standing feet give male dolls the ability to store upright, which is a genuine upside.

What Barefoot Photos Reveal
Worth a final note is the aesthetic difference between standing and non-standing feet. The bolts make standing feet somewhat harder at the bottom, and this can be apparent when the doll is barefoot. Dolls with fragile features especially suffer, some customers feel, because the hard soles look slightly industrial and less aesthetically satisfying. Some purchasers prefer non-standing feet, which are softer and more natural-looking. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.

Maintenance: Check the Bolts Periodically
Maintenance is another angle that's worth considering. The bolts in standing feet need a periodic check to confirm they're secure, because the worst case is a bolt falling out totally and the doll collapsing, with a loose one damaging the foot or ankle on the way there. Use the suitable tool to tighten any bolts that feel loose when you check them by gently twisting them every few months. Non-standing feet don't have this issue, because there's no hardware to come loose, which makes them marginally lower-maintenance in the long run.

Standing Feet and Flooring
Another effect of the bolts is on how the doll stands on distinct surfaces. The doll is constant on carpet because the bolts grip well there. Slipping bolts on hard flooring, particularly if the floor is silky, can mean the doll needs additional support to stay upright. Think about a small mat or a grippy pad under the feet when she's on a hard surface, as it avoids sliding. Non-standing feet don't have this issue, because the doll isn't standing in the first place, but if you're planning to display a doll with standing feet on a hard floor, this is worth knowing about.

An Overlooked Detail: Proportions
Regularly overlooked, there's a final consideration in how standing feet impact the doll's overall proportions. Barefoot photos can look somewhat different because the bolts add a small amount of length to the foot. This is a subtle effect, and it's usually invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about specific proportions. Lacking the bolts, non-standing feet avoid this effect and are a little shorter and more natural-looking.

One of the Simplest Upgrades to Justify
At the end of the day, standing feet are worth the extra cost for most customers, as they open up choices for posing, display, storage and the shower that non-standing feet don't. The only buyers who should skip them are those who are certain the doll will only be used in bed and won't be displayed or photographed standing. Anyone else should go for standing feet, the better choice and one of the simplest upgrades to justify. More info at this A Straight-Up Look at Modern Sex Dolls- The Real Talk 9ac8536 together with A No-BS Lowdown on Sex Dolls- The Stuff That Matters and A Straight-Up Primer on Modern Sex Dolls- The Honest Breakdown. Also check out find here on top of more helpful hints as well as additional hints which is worth considering with top article together with related site not to mention useful source on top of find more information alongside all you can try these out which is worth considering with find more and a fantastic read for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]