[center][/center]

[center][size=large]CLICK HERE FOR THE BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
Few customers think about standing feet beforehand, yet the difference, once they need them, is enormous. A small detail on the spec sheet, sure, but it changes how the doll stores, photographs and wears over time, as well as what you can do with her. If you grasp the difference before you order, you've evaded an irritating purchase in one of the simplest ways there is.

The Difference Explained Simply
At its most basic, the difference is straightforward. Metal bolts embedded in the soles of standing feet allow the doll to stand upright without support. These bolts are absent from non-standing feet, so the doll can only sit or lie down, and trying to stand her will damage the feet. It all hinges on the bolts, with everything else following from whether they're present or not.

The Photographer's Choice
You need standing feet for photography and display. Anywhere that requires her to be upright, including a corner or a doorway, can display a doll that can stand unaided, and she can be photographed in full-length poses without apparent supports. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the principal reason most photographers specify standing feet when ordering.

If You Want to Shower With Your Doll
Also important is standing feet for shower use. She needs to stand if the plan is a shower together, because a doll lying down in a shower is impractical and hazardous. Standing feet make her constant in a wet environment, and with the metal bolts the feet don't absorb water as non-standing feet would. Genuine safety is at stake, as water absorption in non-standing feet can lead to rust and eventual structural failure.

Water Will Find Its Way In
The shower use point is worth expanding, because it's the source of a lot of damaged dolls. Water gets absorbed by the foam or filler material inside the ankle of non-standing feet when it gets wet. Rust follows as the water attacks the metal skeleton inside the leg; it takes weeks or months to become noticeable, but it's essentially unfixable once it starts. No matter how careful you are, a doll with non-standing feet should never be in the shower; water finds its way in regardless of precautions.

Display Rather Than Hide
Storage is easier with standing feet in some setups. A corner, a wardrobe or a storage cabinet can hold a doll with standing feet upright, with no need for a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient alternative, and for anyone who wants to display the doll rather than keep her hidden it's a decent one. Standing feet permit storage that's noticeable and accessible, something some purchasers prefer.

What Standing Feet Cost
The drawback of standing feet is that they're marginally more costly and marginally heavier. The metal bolts add a small amount of weight to the doll, and the manufacturing process is more involved, so the price is usually a few percent higher than a doll with non-standing feet. Though the difference is small and it's ordinarily worth the additional cost, knowing about it matters if you're purchasing on an extremely tight budget.

Bolts Showing When the Feet Are Bare
The bolts can become noticeable if the feet are bare, and that's the other downside. Some purchasers are distracted when the bolts are apparent in photos of a doll in high-heeled shoes or open-toed footwear. Preventing standing feet totally over this would be unnecessary; it's a slight aesthetic issue that closed shoes, or footwear that conceals the bolts, will solve.

A Completely Valid Choice
You don't need standing feet if you only want to use the doll in bed and don't plan to display her standing or shower with her; non-standing feet are cheaper and lighter. Where most of her life will be spent in a bed or on a sofa, non-standing feet are perfectly sufficient and leave money for upgrades like articulated hands or a better wig. If you know what you want, this is a totally valid choice.

What Non-Standing Feet Feel Like
More comfortable to touch, for some purchasers, are non-standing feet, which are slightly softer and more flexible. On its own this subtle difference doesn't typically justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. A hard core inside isn't what you feel in the feet on non-standing dolls; they feel more like the rest of the doll.

Remember They're Non-Standing
The huge risk? Customers forget what kind of feet they have and try to stand the doll anyway. This usual oversight causes genuine damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. Even if you attempt to support her, the doll can no longer stand as a result, because the feet have been permanently damaged. When you purchase non-standing feet, remember what they are and don't be tempted to test their limits.

Decide Before You Order
And what about retrofitting standing feet to a doll that doesn't have them? To put it briefly, not readily, no. Because the bolts are embedded in the soles during manufacturing, adding them later means cutting into the feet and installing new hardware, a pricey process that frequently doesn't work as well as the original. Thinking of buying a doll without standing feet, but might want them later? Better to buy a doll with standing feet in the first place than to try to add them later.

Standing Feet Don't Limit What You Can Do
If you're choosing between standing and non-standing feet, the functional advice is direct. If you plan to photograph the doll, display her standing, or use her in the shower, you need standing feet. For use only in bed or on a sofa, with no care about display, non-standing feet are perfectly enough. For the doubtful, standing feet are the safer choice; they leave you free to do whatever you like with the doll and are worth the small additional cost.

Room for Storage Is a Real Concern
Gender plays a part too, and it's worth mentioning. Heavier, and more difficult to store in any other way, male dolls typically upside from standing feet more than female dolls. Pressure on the body and more space are needed when a 45kg male doll that can't stand has to be stored lying down. Male dolls can store upright with standing feet, which is a real advantage for customers who don't have a lot of room.

Barefoot Photography Priorities
To finish, the aesthetic difference between standing and non-standing feet is worth noting. Standing feet have a marginally harder bottom because of the bolts, and this can be noticeable with the doll barefoot. The look of the hard soles is slightly industrial, and some buyers find that less aesthetically pleasing, particularly on dolls with fragile features. Softer and more natural-looking, non-standing feet are preferred by some purchasers. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

A Quick Routine Check
A maintenance angle is also worth considering. Periodic checks keep standing feet safe, given that a loose bolt can damage the foot or the ankle and a bolt falling out entirely can cause the doll to collapse. Tighten the bolts with the suitable tool if they feel loose when you check them every few months by gently twisting. Because non-standing feet have no hardware to come loose, they don't have this issue, and they're slightly lower-maintenance in the long run.

Grip and Stability
Different surfaces change how the doll stands, thanks to the bolts. The bolts grip well on carpet, so the doll is stable. On silky hard flooring in particular, the bolts can slip, and the doll may need additional support to stay upright. Putting a small mat or a grippy pad under the feet is worth considering on a hard surface, as it avoids sliding. It only concerns standing feet: non-standing feet don't have the issue because the doll isn't standing in the first place, but displaying one on a hard floor makes it worth knowing about.

How Standing Feet Change the Look
There's one more consideration that's frequently overlooked: standing feet impact the doll's overall proportions. Bolts mean a small amount of extra length in the foot, which can slightly change how the doll looks in barefoot photos. Subtle as the effect is, and ordinarily invisible in shoes, it's worth knowing about if you plan to photograph the doll barefoot and care about specific proportions. With non-standing feet there are no bolts, so no such effect, and the feet are a little shorter and more natural-looking.

The Better Choice for Everyone Else
At the end of the day, standing feet are worth the additional cost for most buyers, as they open up alternatives for posing, display, storage and the shower that non-standing feet don't. Nobody should skip them unless they're certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are better for everyone else, and they're among the simplest upgrades to justify. More info at this rosslink. Also check out website for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]