[center][/center]

[center][size=large]CLICK FOR BEST SEX DOLL FEET ADVICE HERE[/size][/center]

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
Few customers think about standing feet beforehand, yet the difference, once they need them, is gigantic. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. To steer clear of an annoying purchase, understand the difference before you order; it's one of the simplest ways.

Bolts or No Bolts
The core difference is an uncomplicated one. Metal bolts embedded in the soles of standing feet permit the doll to stand upright without support. Non-standing feet lack these bolts, meaning the doll can only sit or lie down, with damage to the feet if you attempt to stand her. Are the bolts there or not? That's the key, and everything else follows from it.

Why Photographers Specify Standing Feet
Standing feet are what photography and display depend on. A doll that stands unaided can be photographed full-length with no noticeable supports, and displayed in a corner, a doorway, or anywhere else she needs to be upright. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the primary reason most photographers specify standing feet when ordering.

A Real Safety Consideration
If you want shower use, standing feet are essential as well. If you want to shower with your doll, she must be able to stand, since laying her down in a shower is impractical as well as dangerous. Metal bolts ensure that the feet don't absorb water the way non-standing feet would; the standing feet also give her stability in a wet environment. Rust and eventual structural failure can follow from water absorption in non-standing feet, which makes this a real safety consideration.

Foam or Filler Inside the Ankle
The shower use point needs expanding, since so many damaged dolls are down to it. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. Basically unfixable once it starts, the rust the water causes in the metal skeleton inside the leg takes weeks or months to become evident. A doll with non-standing feet should never be in the shower, no matter how attentive you are, because the water will find its way in regardless of your precautions.

Evident and Accessible Storage
Standing feet are also easier to store in some setups. Standing feet let you store the doll upright in a corner, a wardrobe, or a storage cabinet, without a hanging hook or a storage case. This works as a space-efficient choice when there's no room for a hanging setup, and it's a decent choice if you want to display the doll rather than keep her hidden. The standing feet make it possible to store the doll in a way that's apparent and accessible, which some customers prefer.

The Extra Cost Explained
A drawback of standing feet: they're marginally more costly and somewhat heavier. Slightly more weight comes from the metal bolts, and the more involved manufacturing process pushes the cost normally a few percent above a doll with non-standing feet. If you're acquiring on a very tight budget, know that the difference is small and it's typically worth the additional cost.

Closed Shoes Hide the Bolts
The bolts can become noticeable if the feet are bare, and that's the other disadvantage. If the doll wears high-heeled shoes or open-toed footwear, the bolts might be evident in photos, which some buyers find distracting. This is a trivial aesthetic issue, and it can be solved by covering the feet with closed shoes or by choosing footwear that conceals the bolts, so it's not a reason to avoid standing feet entirely.

Perfectly Adequate for Many Buyers
Customers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. Articulated hands or a better wig could be paid for with the savings, and non-standing feet are perfectly acceptable for a doll who largely lives in a bed or on a sofa. Entirely valid is this choice for purchasers who know what they want.

A Subtle Difference
Non-standing feet are also marginally softer and more adaptable, which some purchasers find more comfortable to touch. It's worth knowing about if you're specifically looking for maximum softness, though this is a subtle difference and not typically enough to justify the choice on its own. The feet on non-standing dolls feel less like they have a hard core inside them, and more like the rest of the doll.

Remember They're Non-Standing
Attempting to stand the doll regardless, after forgetting what kind of feet they have, is the big risk buyers run with non-standing feet. This is a common mistake, and it causes genuine damage, because the foam inside the ankle can't support the doll's weight and will tear or collapse. You end up with a doll that can no longer stand even with your support, since the feet have been permanently damaged. You're purchasing non-standing feet? Remember it, and don't be tempted to test their limits.

New Hardware Rarely Works as Well
And what about retrofitting standing feet to a doll that doesn't have them? No, not readily, is the short answer. Adding the bolts later requires cutting into the feet and installing new hardware, which is pricey and frequently doesn't work as well as the original, because they're embedded in the soles during manufacturing. If you're considering acquiring a doll without standing feet, and you think you might want them later, it's better to acquire a doll with standing feet in the first place than to attempt to add them later.

Selecting Between Standing and Non-Standing Feet
There's direct functional advice for customers choosing between standing and non-standing feet. If you plan to photograph the doll, display her standing, or use her in the shower, you need standing feet. Non-standing feet will do perfectly well if you only want to use her in bed or on a sofa and don't care about display. If you're on the fence, go with standing feet, the safer choice, because nothing is ruled out and the small additional cost is worth paying.

Heavier Dolls Are Harder to Store
It's worth mentioning a gender consideration too. Male dolls tend to upside more than female dolls from standing feet, as they're heavier and more hard to store in any other way. A 45kg male doll who can't stand must be stored lying down, putting pressure on the body and requiring more space. The ability to store upright is given to male dolls by standing feet, and that's a real benefit for purchasers who don't have a lot of room.

Apparent Hardness at the Bottom
One final note: the aesthetic difference between standing and non-standing feet. With the doll barefoot, the slightly harder bottom of standing feet, down to the bolts, can be noticeable. The look of the hard soles is marginally industrial, and some customers find that less aesthetically gratifying, particularly on dolls with fragile features. More natural-looking and softer are non-standing feet, which some buyers prefer. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

Check Every Few Months by Gently Twisting
Worth considering, too, is a maintenance angle. Keep an eye on the bolts in standing feet, since a loose bolt can damage the foot or the ankle while a bolt that falls out totally can make the doll collapse. Check every few months, by gently twisting the bolts, and tighten with the appropriate tool whichever feel loose. Non-standing feet escape this issue because there's no hardware to come loose, which makes them slightly lower-maintenance long term.

Avoiding Sliding
Distinct surfaces mean distinct standing behaviour, and the bolts influence it. The doll is steady on carpet, where the bolts grip well. On smooth hard flooring in particular, the bolts can slip, and the doll may need additional support to stay upright. Sliding is stopped on a hard surface by a small mat or a grippy pad under the feet, which you should consider. This is worth knowing about if you plan to display a doll with standing feet on a hard floor. Non-standing feet don't have the issue, because the doll isn't standing in the first place.

More Natural-Looking Without the Bolts
One final consideration, often overlooked, is how standing feet influence the doll's overall proportions. A small quantity of length is added to the foot by the bolts, which can a little change the way the doll looks in barefoot photos. It's a subtle effect that's generally invisible in shoes, yet worth knowing about for barefoot photography when you care about precise proportions. With non-standing feet there are no bolts, so no such effect, and the feet are marginally shorter and more natural-looking.

One of the Simplest Upgrades to Justify
Most buyers should find standing feet worth the extra cost; they open up posing, display, storage, and shower alternatives that non-standing feet don't. That's the bottom line. The exception is the purchaser who's certain the doll will only be used in bed and won't be displayed or photographed standing. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out get more for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]