[center][/center]

[center][size=large]CLICK HERE FOR BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: Which Should You Choose
You won't think about standing feet until you need them, and then you'll find the difference is enormous. Small on the spec sheet, it still changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. To stay away from an annoying purchase, understand the difference before you order; it's one of the simplest ways.

The Basic Difference Between Standing and Non-Standing Feet
The basic difference is simple. The doll can stand upright without support because standing feet have metal bolts embedded in the soles. These bolts are absent from non-standing feet, so the doll can only sit or lie down, and attempting to stand her will damage the feet. Everything else follows from whether the bolts are present or not, because the bolts are the key.

Why Photographers Specify Standing Feet
For photography and display, standing feet are crucial. Unaided standing means full-length poses without visible supports, and display in a corner, a doorway, or anywhere else that needs her to be upright. The principal reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.

Lying Her Down in a Shower Is Impractical and Dangerous
Shower use is another thing for which standing feet are essential. Want to shower with your doll? She has to be able to stand, since lying her down in a shower is impractical and dangerous. The feet don't absorb water the way non-standing feet would, because the metal bolts make sure that, and the standing feet give her stability in a wet environment. This is a real safety consideration; water absorption in non-standing feet can lead to rust and eventual structural failure.

Never Shower a Non-Standing Doll
Because it's the source of a lot of damaged dolls, the shower use point is worth expanding. When it gets wet, the foam or filler material inside the ankle of non-standing feet absorbs water. Rust follows as the water attacks the metal skeleton inside the leg; it takes weeks or months to become evident, but it's basically unfixable once it starts. The water will find its way in regardless of your precautions, so a doll with non-standing feet should never be in the shower, no matter how cautious you are.

Standing Feet Make Storage Easier
In some setups, standing feet also make storage easier. A hanging hook or a storage case isn't needed for a doll with standing feet, who can be stored upright in a corner, a wardrobe, or a storage cabinet. This is a space-efficient option for buyers who don't have room for a hanging setup, and it's a decent alternative for customers who want to display the doll rather than keep her hidden. Standing feet make evident and accessible storage possible, which suits some customers best.

Metal Bolts Add Weight
Standing feet cost a little more and weigh slightly more, and that's the downside. Price-wise, a doll with standing feet is normally a few percent higher than one with non-standing feet; the metal bolts add a small amount of weight and manufacturing is more involved. The difference is small, typically worth the extra cost, and worth knowing about if you're purchasing on a really tight budget.

Closed Shoes Hide the Bolts
The bolts can become visible if the feet are bare, and that's the other disadvantage. High-heeled shoes or open-toed footwear on a doll can leave the bolts apparent in photos, which some purchasers find distracting. Cover the feet with closed shoes or opt for footwear that conceals the bolts and this slight aesthetic issue is solved, so it's not a reason to steer clear of standing feet totally.

A Completely Valid Choice
Customers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly acceptable when the doll will mainly be in a bed or on a sofa. For purchasers who know what they want, this is an entirely valid choice.

Comfortable to Touch
Some customers find non-standing feet more comfortable to touch, being marginally softer and more elastic. You won't ordinarily choose on this alone, as it's a subtle difference, but it's worth knowing about if you're specifically looking for maximum softness. The feet on non-standing dolls feel more like the rest of the doll and less like they have a hard core inside them.

Foam in the Ankle Can't Take the Weight
Forgetting what kind of feet they have, buyers attempt to stand the doll anyway, and that's the huge risk with non-standing feet. Why is this common error so damaging? The foam inside the ankle can't support the doll's weight, and it'll tear or collapse. Even if you try to support her, the doll can no longer stand as a result, because the feet have been permanently damaged. Resist the temptation to test the limits of non-standing feet, and remember that they're non-standing, if you're acquiring them.

Bolts Are Embedded During Manufacturing
Can standing feet be retrofitted to a doll that doesn't have them? That's a question too. Briefly: no, and certainly not readily. Cutting into the feet and installing new hardware is what adding the bolts afterwards needs, which is costly and often doesn't work as well as the original; the bolts are embedded in the soles during manufacturing. Thinking of buying a doll without standing feet, but might want them later? Better to acquire a doll with standing feet in the first place than to attempt to add them later.

Which Feet Should You Order?
Buyers selecting between standing and non-standing feet can follow some uncomplicated sensible advice. Plans to photograph the doll, display her standing or use her in the shower mean you need standing feet. Don't care about display and only want to use her in bed or on a sofa? Non-standing feet are perfectly enough. Standing feet are the safe default if you can't decide, as they never limit what you can do with the doll and the small extra cost is worth it.

Why Male Dolls Need Standing Feet More
There's also a gender consideration worth mentioning. Heavier, and more hard to store in any other way, male dolls broadly upside from standing feet more than female dolls. There's no choice but to store a 45kg male doll that can't stand lying down, which puts pressure on the body and requires more space. Male dolls can store upright with standing feet, which is a genuine benefit for purchasers who don't have a lot of room.

Weighing Looks Against Function
The aesthetic difference between standing and non-standing feet deserves a final note. A little harder at the bottom is how standing feet are, because of the bolts, and it can be evident when the doll is barefoot. The hard soles look somewhat industrial, so some purchasers find this less aesthetically satisfying, especially on dolls with fragile features. Non-standing feet are more natural-looking and softer, something some buyers prefer. The trade-off only matters if you're photographing the doll barefoot; if barefoot photos are a priority, it's worth factoring into your decision.

A Loose Bolt Can Damage the Foot or Ankle
One more angle worth considering: maintenance. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. Every few months, give the bolts a soft twist to check them, and tighten them with the appropriate tool if they feel loose. Over the long run, non-standing feet need slightly less maintenance, because they don't have hardware that can come loose.

Grip and Stability
The bolts have an effect, too, on how the doll stands on distinct surfaces. On carpet, the doll is stable, the bolts gripping well. The doll may need extra support to stay upright on hard flooring, where the bolts can slip, particularly if the floor is smooth. Hard surface under the feet? Consider a small mat or a grippy pad to avoid sliding. Standing feet on a hard floor is the case to know about here, since non-standing feet don't have this issue, the doll not standing in the first place.

Generally Invisible in Shoes
The doll's overall proportions are affected by standing feet, a final consideration that's regularly overlooked. The bolts add a small quantity of length to the foot, which can marginally change the way the doll looks in barefoot photos. Planning to photograph the doll barefoot and caring about specific proportions? This subtle effect, usually invisible in shoes, is worth knowing about. No bolts means no such effect with non-standing feet, whose feet are a little shorter and more natural-looking.

What Standing Feet Open Up
The extra cost of standing feet is worth it for most purchasers, because they open up posing, display, storage and shower options that non-standing feet don't; that's the bottom line. Nobody should skip them unless they're certain the doll will only be used in bed and won't be displayed or photographed standing. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out my explanation as well as click here and i thought about this for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]