[center][/center]

[center][size=large]VIEW THE BEST SEX DOLL FEET GUIDE HERE[/size][/center]

Standing Feet Vs Non-Standing Feet: What The Difference Means
Think of standing feet as a feature nobody thinks about until they need it, when the difference proves vast. What you can do with her, how she stores, how she photographs and how she wears over time: a small spec sheet detail changes all of it. Before you order, understand the difference, which is one of the simplest ways to stay away from an irritating purchase.

The Difference Explained Simply
It's a direct difference, at its most basic. Metal bolts embedded in the soles of standing feet allow the doll to stand upright without support. Non-standing feet lack these bolts, meaning the doll can only sit or lie down, with damage to the feet if you attempt to stand her. Having the bolts or not is the key, and everything else follows from that.

Upright Without Props
Standing feet are what photography and display depend on. A doll that can stand unaided can be photographed in full-length poses without evident supports, and can be displayed in a corner, a doorway, or anywhere else that requires her to be upright. A wide range of poses and settings that aren't possible with non-standing feet opens up, and that's the main reason most photographers specify standing feet when ordering.

A Real Safety Consideration
In the shower, too, standing feet are crucial. If you want to shower with your doll, she must be able to stand, since laying her down in a shower is impractical as well as unsafe. The metal bolts make sure that the feet don't absorb water the way non-standing feet would, and the standing feet give her stability in a wet environment. Genuine safety is at stake, as water absorption in non-standing feet can lead to rust and eventual structural failure.

No Precaution Is Enough
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. Water gets absorbed by the foam or filler material inside the ankle of non-standing feet when it gets wet. Once it starts, the rusting of the metal skeleton inside the leg by the water is fundamentally unfixable, though it takes weeks or months to become visible. Nonetheless diligent you are, keep a doll with non-standing feet out of the shower, because the water will find its way in regardless of your precautions.

A Storage Option for Display-Minded Buyers
Storage is easier with standing feet in some setups. Stored upright in a corner, a wardrobe or a storage cabinet, a doll with standing feet doesn't need a hanging hook or a storage case. Purchasers who don't have room for a hanging setup will find this a space-efficient alternative, and it suits customers who want to display the doll rather than keep her hidden. Standing feet make noticeable and accessible storage possible, which suits some buyers best.

The Extra Cost Explained
Somewhat more pricey and marginally heavier: that's the drawback of standing feet. Expect the price to be a few percent higher than a doll with non-standing feet, as the metal bolts add a small amount of weight and the manufacturing process is more involved. The difference is small, and it's usually worth the additional cost, but it's worth knowing about if you're purchasing on a very tight budget.

A Minor Aesthetic Issue
Bare feet can make the bolts evident, which is the other disadvantage. The bolts might be evident in photos on a doll with high-heeled shoes or open-toed footwear, and some customers find that distracting. You can solve this minor aesthetic issue by covering the feet with closed shoes or choosing footwear that hides the bolts, so don't avoid standing feet totally because of it.

Non-Standing Feet: Cheaper and Lighter
Fine for customers who only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are also cheaper and lighter. A doll that lives mainly in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. Purchasers who know what they want can make this choice completely validly.

Not Enough to Decide on Its Own
Non-standing feet are also marginally softer and more elastic, which some buyers find more comfortable to touch. This is a subtle difference, and it's not usually enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. Less like they have a hard core inside them and more like the rest of the doll is how the feet on non-standing dolls feel.

Remember They're Non-Standing
Non-standing feet carry a large risk, which is buyers forgetting what kind of feet they have and attempting to stand the doll regardless. Real damage comes of this common error, as the foam inside the ankle can't take the doll's weight and will tear or collapse. What results is a doll that can't stand any more even with support, as the feet have been permanently damaged. Keep in mind that non-standing feet are non-standing, if that's what you're purchasing, and don't be tempted to test their limits.

Buy Standing Feet in the First Place
Also worth asking is whether standing feet can be retrofitted to a doll that lacks them. In short, no, not readily. The original bolts are embedded in the soles during manufacturing, and an afterwards addition needs cutting into the feet and installing new hardware, which is costly and often not as good. Attempting to add standing feet later is worse than buying a doll with standing feet in the first place, so if you're considering a doll without them and might want them later, acquire them first.

Opting for Between Standing and Non-Standing Feet
Buyers choosing between standing and non-standing feet can follow some simple functional advice. If any of photographing the doll, displaying her standing, or utilising her in the shower is on the cards, you need standing feet. For use only in bed or on a sofa, with no care about display, non-standing feet are perfectly adequate. If you're not sure, standing feet are the safer choice, because they don't limit what you can do with the doll and they're worth the small additional cost.

Room for Storage Is a Real Concern
We should mention a gender consideration as well. Male dolls are heavier and harder to store in any other way, so they typically benefit from standing feet more than female dolls. A 45kg male doll that can't stand has to be stored lying down, and that puts pressure on the body and needs more space. It's a genuine advantage for purchasers who don't have a lot of room that standing feet let male dolls store upright.

Harder Soles Because of the Bolts
Standing and non-standing feet differ aesthetically, which is worth a final note. Standing feet have an a little harder bottom because of the bolts, and this can be evident with the doll barefoot. Some buyers consider it less aesthetically satisfying, notably with fragile features, because of the slightly industrial look of the hard soles. Some purchasers prefer the softer, more natural look of non-standing feet. If barefoot photos are a priority, factor this trade-off into your decision; it only matters if you're photographing the doll barefoot.

No Hardware to Come Loose
A maintenance angle is also worth considering. Bolt security on standing feet needs checking from time to time; a loose one risks the foot or ankle, and a missing one risks the doll collapsing. A mild twist of the bolts every few months checks them; if they feel loose, tighten them with the appropriate tool. Over the long run, non-standing feet need marginally less maintenance, because they don't have hardware that can come loose.

Hard Flooring Can Be Slippery
Another effect of the bolts is on how the doll stands on different surfaces. The doll is stable on carpet, where the bolts grip well. If the floor is hard, and particularly smooth, the bolts can slip and the doll may need extra support to stay upright. To stop sliding on a hard surface, consider a small mat or a grippy pad beneath the feet. Non-standing feet escape this issue, since the doll isn't standing in the first place; plan to display a doll with standing feet on a hard floor, though, and it's worth knowing about.

If You Care About Exact Proportions
The doll's overall proportions are impacted by standing feet, a final consideration that's often overlooked. The bolts add a small quantity of length to the foot, which can a little change the way the doll looks in barefoot photos. The effect is subtle and typically invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about precise proportions. Lacking the bolts, non-standing feet avoid this effect and are a little shorter and more natural-looking.

Final Verdict on Feet
What it comes down to is that most buyers will find standing feet worth the extra cost, since they open up posing, display, storage, and shower choices that non-standing feet don't. The exception is the customer who's certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are better for everyone else, and they're among the simplest upgrades to justify. More info at this rosslink. Also check out their explanation not to mention get redirected here and find more for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]