[center][/center]

[center][size=large]SEE BEST SEX DOLL FEET ADVICE TODAY[/size][/center]

What Are Standing Feet? Standing Vs Non-Standing Feet Explained
It's only when purchasers need standing feet that they notice them, and the difference is gigantic. On the spec sheet it looks trivial, yet it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Knowing the difference before you order is among the simplest ways to dodge a frustrating purchase.

The Bolts Are the Key
Boiled down, the difference is uncomplicated. In standing feet there are metal bolts embedded in the soles, which is how the doll stands upright without support. If the feet are non-standing, there are no bolts, so the doll can only sit or lie down; stand her and you'll damage the feet. Whether the bolts are present decides everything else; they're the key.

The Photographer's Choice
Photography and display are where standing feet are necessary. Photographed in full-length poses without apparent supports, and displayed in a corner, a doorway or anywhere else that needs her upright: that's what a doll that can stand unaided can do. The main reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.

Standing Feet Are Also Essential for Showers
Standing feet are necessary for the shower as well. Lying her down in a shower is impractical and risky, so showering with your doll means she needs to stand. In a wet environment the standing feet give her stability, while the metal bolts ensure that the feet don't absorb water the way non-standing feet would. Water absorption in non-standing feet can lead to rust and eventual structural failure, so this is a real safety consideration.

Water Rusts the Metal Skeleton
The shower use point is worth expanding, because it's the source of a lot of damaged dolls. Foam or filler material sits inside the ankle of non-standing feet, and it absorbs water when it gets wet. Fundamentally unfixable once it starts, the rust the water causes in the metal skeleton inside the leg takes weeks or months to become evident. Showers and non-standing feet don't mix, no matter how diligent you are, as the water will find its way in anyway of your precautions.

Upright in a Corner, Wardrobe or Cabinet
Easier storage is another thing standing feet offer in some setups. A corner, a wardrobe or a storage cabinet can hold a doll with standing feet upright, with no need for a hanging hook or a storage case. It's a space-efficient alternative for buyers without room for a hanging setup, and a decent one for buyers who'd rather display the doll than keep her hidden. With the standing feet, the doll can be stored clearly and accessibly, which some buyers prefer.

A More Involved Manufacturing Process
It's a drawback that standing feet are somewhat more expensive and somewhat heavier. You'll ordinarily pay a few percent more than for non-standing feet, because the metal bolts add a small quantity of weight and manufacturing is more involved. Small as the difference is, and normally worth the additional cost, it's worth knowing about if you're buying on an extremely tight budget.

A Minor Aesthetic Issue
The bolts can become visible if the feet are bare, and that's the other drawback. Some purchasers are distracted when the bolts are evident in photos of a doll in high-heeled shoes or open-toed footwear. The small aesthetic issue goes away with closed shoes or footwear that conceals the bolts, which means it's not a reason to stay away from standing feet entirely.

Putting the Savings Elsewhere
Non-standing feet are cheaper, lighter, and perfectly fine if the doll will only be used in bed and not displayed standing or taken in the shower. Spending most of her life in a bed or on a sofa? Non-standing feet are perfectly sufficient, and the savings can go on upgrades such as articulated hands or a better wig. Purchasers who know what they want can make this choice entirely validly.

What Non-Standing Feet Feel Like
Also, non-standing feet are marginally softer and more pliable, something some buyers find more comfortable to touch. Not usually enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. On non-standing dolls the feet feel more like the rest of the doll, not like they have a hard core inside them.

Foam in the Ankle Can't Take the Weight
The sizable risk with non-standing feet is that customers forget what kind of feet they have and try to stand the doll regardless. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's real damage from a usual mistake. Permanently damaged feet are the cause of a doll that can no longer stand even if you attempt to support her. You're buying non-standing feet? Remember it, and don't be tempted to test their limits.

Adding Bolts Afterwards
And what about retrofitting standing feet to a doll that doesn't have them? The answer, in short, is no, not easily. Costly, and frequently not as decent as the original, is the process of adding the bolts after that by cutting into the feet and installing new hardware, since they're embedded in the soles during manufacturing. Considering a doll without standing feet, and think you might want them later? Buy a doll with standing feet in the first place; it's better than attempting to add them later.

If You're Not Sure, Choose Standing
Direct is the functional advice for purchasers opting for between standing and non-standing feet. Standing feet are a must if you plan to photograph the doll, display her standing, or use her in the shower. Non-standing feet will do perfectly well if you only want to use her in bed or on a sofa and don't care about display. Standing feet are the safe default if you can't decide, as they never limit what you can do with the doll and the small additional cost is worth it.

A Gender Consideration
Another consideration worth mentioning concerns gender. Standing feet upside male dolls more than female dolls in general, as they're heavier and harder to store any other way. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and requires more space. For buyers who don't have a lot of room, standing feet give male dolls the ability to store upright, which is a real upside.

Harder Soles Because of the Bolts
Standing and non-standing feet differ aesthetically, which is worth a final note. When the doll is barefoot, the small hardness at the bottom of standing feet, caused by the bolts, can be apparent. The hard soles look a little industrial, so some customers find this less aesthetically satisfying, particularly on dolls with fragile features. Non-standing feet are softer and more natural-looking, which some purchasers prefer. Photographing the doll barefoot is the only time this trade-off matters, and it's worth factoring into your decision if barefoot photos are a priority.

The Maintenance Angle
It's worth considering the maintenance angle as well. Look over the bolts on standing feet now and again to make sure they're secure; a loose bolt can damage the foot or ankle, and a lost bolt can cause the doll to collapse. By gently twisting the bolts every few months you can check them, and if they feel loose, use the appropriate tool to tighten them. Because non-standing feet have no hardware to come loose, they don't have this issue, and they're slightly lower-maintenance in the long run.

Displaying a Standing Doll on a Hard Floor
The bolts also impact how the doll stands on different surfaces. Grip is solid on carpet, and the doll is constant. Slipping bolts on hard flooring, particularly if the floor is silky, can mean the doll needs additional support to stay upright. Think about a small mat or a grippy pad under the feet when she's on a hard surface, as it avoids sliding. It only concerns standing feet: non-standing feet don't have the issue because the doll isn't standing in the first place, but displaying one on a hard floor makes it worth knowing about.

An Overlooked Detail: Proportions
A final, often overlooked, consideration is the effect of standing feet on the doll's overall proportions. Because the bolts add a small amount of length to the foot, the doll can look somewhat distinct in barefoot photos. It's worth knowing about if you're planning to photograph the doll barefoot and you care about precise proportions, though this is a subtle effect and normally invisible in shoes. Non-standing feet lack the bolts and therefore this effect, leaving the feet marginally shorter and more natural-looking.

Final Verdict on Feet
The bottom line is that most purchasers get their money's worth from standing feet, because they open up posing, display, storage and shower alternatives that non-standing feet don't. Skip them if, and only if, you're certain the doll will only be used in bed and won't be displayed or photographed standing. For all other customers, standing feet are the better choice and among the simplest upgrades to justify. More info at this rosslink. Also check out link not to mention click this link on top of here are the findings as well as other on top of try this website alongside all website on top of explanation alongside all read here not to mention check this and moved here for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]