[center]
[/center] [center][size=large]CLICK HERE FOR THE BEST SEX DOLL FEET ADVICE TODAY[/size][/center]
Standing Feet Vs Non-Standing Feet Explained For Sex Doll Buyers
Standing feet are one of those features that buyers don't think about until they need them, and then they discover the difference is huge. What you can do with her, how she stores, how she photographs and how she wears over time: a small spec sheet detail changes all of it. Understanding the difference before you order is one of the simplest ways to avoid a frustrating purchase.
The Basic Difference Between Standing and Non-Standing Feet
There's a simple basic difference. The doll can stand upright without support because standing feet have metal bolts embedded in the soles. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and trying to stand her will damage the feet. The key is the bolts, and everything else follows from whether they're there.
A Wider Range of Poses and Settings
Photography and display are where standing feet are vital. Standing unaided, she can be photographed in full-length poses without apparent supports, and displayed in a corner, a doorway, or any other spot that needs her to be upright. Poses and settings in a wide range become possible, which non-standing feet rule out, and most photographers specify standing feet when ordering for exactly that reason.
Water Absorption Leads to Rust
If you want shower use, standing feet are important as well. If you want to shower with your doll, she must be able to stand, since laying her down in a shower is impractical as well as hazardous. A wet environment is no complication for stability with standing feet, and the metal bolts ensure the feet don't absorb water the way non-standing feet would. Water absorption in non-standing feet can lead to rust and eventual structural failure, so this is a real safety consideration.
Hidden Rust Inside the Leg
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. Water gets absorbed by the foam or filler material inside the ankle of non-standing feet when it gets wet. After that, water rusts the metal skeleton inside the leg; you won't see it for weeks or months, and it's essentially unfixable once it starts. Never put a doll with non-standing feet in the shower, nonetheless careful you are, since the water will find its way in irrespective of your precautions.
No Hanging Hook or Storage Case Needed
In some setups, a doll with standing feet is also easier to store. Standing feet let you store the doll upright in a corner, a wardrobe, or a storage cabinet, without a hanging hook or a storage case. Purchasers who don't have room for a hanging setup will find this a space-efficient option, and it suits purchasers who want to display the doll rather than keep her hidden. The standing feet make it possible to store the doll in a way that's apparent and accessible, which some purchasers prefer.
Metal Bolts Add Weight
A drawback of standing feet: they're somewhat more costly and a little heavier. A few percent extra on the cost is typical compared with a doll with non-standing feet, thanks to a small amount of weight from the metal bolts and a more involved manufacturing process. The difference is small, and it's usually worth the extra cost, but it's worth knowing about if you're buying on a very tight budget.
High Heels and Open-Toed Footwear
The bolts can become noticeable if the feet are bare, and that's the other disadvantage. In photos, the bolts might show on a doll wearing high-heeled shoes or open-toed footwear, and some purchasers find this distracting. It's a trivial aesthetic issue, solved by covering the feet with closed shoes or picking footwear that conceals the bolts, and not a reason to steer clear of standing feet totally.
The Case for Non-Standing Feet
Cheaper and lighter, non-standing feet do the job for anyone who only wants to use the doll in bed and doesn't plan to display her standing or shower with her. For a doll who'll chiefly be on a bed or sofa, perfectly enough non-standing feet free up cash for other upgrades, such as articulated hands or a better wig. Where buyers know what they want, this is a completely valid choice.
Maximum Softness
Non-standing feet are somewhat softer and more elastic too, and some customers find that more comfortable to touch. The difference is subtle and not typically enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.
Permanent Damage to the Feet
The sizable risk? Customers forget what kind of feet they have and try to stand the doll anyway. This widespread oversight causes real damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. What results is a doll that can't stand any more even with support, as the feet have been permanently damaged. Remember that non-standing feet are non-standing, if you're purchasing them, and don't be tempted to test their limits.
Cutting Into the Feet Is Expensive and Risky
There's also the question of whether standing feet can be retrofitted to a doll that doesn't have them. Short answer: no, not easily. The original bolts are embedded in the soles during manufacturing, and a subsequently addition requires cutting into the feet and installing new hardware, which is pricey and regularly not as good. You might want them later if you're considering buying a doll without standing feet; in that case, it's better to purchase a doll with standing feet in the first place than to try to add them later.
The Safer Option
If you're opting for between standing and non-standing feet, the functional advice is direct. For photographing the doll, displaying her standing, or using her in the shower, you need standing feet. If it's only bed or sofa use you're after, and display is of no concern, non-standing feet are perfectly adequate. Undecided customers are safer with standing feet, which restrict nothing and justify their small additional cost.
Upright Storage for Male Dolls
Gender plays a part too, and it's worth mentioning. Because they're heavier and more tricky to store in any other way, male dolls broadly upside from standing feet more than female dolls. A 45kg male doll that can't stand is a doll that has to be stored lying down, which puts pressure on the body and needs more space. Not having a lot of room? Standing feet give male dolls the ability to store upright, and that's a real upside.
A Trade-Off That Matters for Barefoot Photos
One final note: the aesthetic difference between standing and non-standing feet. Visible when the doll is barefoot can be the small hardness at the bottom of standing feet, which the bolts cause. Hard soles look marginally industrial, which some customers find less aesthetically pleasing, particularly on dolls with delicate features. Non-standing feet are softer and more natural-looking, which some purchasers prefer. The trade-off only matters if you're photographing the doll barefoot; if barefoot photos are a priority, it's worth factoring into your decision.
The Maintenance Angle
There's also a maintenance angle that's worth considering. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. By gently twisting the bolts every few months you can check them, and if they feel loose, use the appropriate tool to tighten them. In the long run non-standing feet are somewhat lower-maintenance, since there's no hardware to come loose and so no such issue.
A Small Mat or Grippy Pad
How well the doll stands on different surfaces depends in part on the bolts. With carpet, the bolts grip well and the doll is stable. Bolts can slip on hard flooring, especially a silky floor, so the doll may need extra support to stay upright. Think about a small mat or a grippy pad under the feet when she's on a hard surface, as it avoids sliding. If you're planning to display a doll with standing feet on a hard floor, know this. Non-standing feet are exempt, as the doll isn't standing in the first place.
Non-Standing Feet Are Slightly Shorter
The doll's overall proportions are affected by standing feet, a final consideration that's often overlooked. Bolts mean a small amount of extra length in the foot, which can somewhat change how the doll looks in barefoot photos. This subtle effect, normally invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about precise proportions. Without the bolts, non-standing feet don't have this effect, and the feet are marginally shorter and more natural-looking.
Additional Cost for Extra Options
The bottom line is that most purchasers get their money's worth from standing feet, because they open up posing, display, storage and shower options that non-standing feet don't. You're safe to skip them only when you're certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else should opt for standing feet, which are the better choice and one of the simplest upgrades to justify. More info at this rosslink. Also check out click for info not to mention continue reading this and article for more.
[center]
[/center] [center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]