[center][/center]

[center][size=large]SEE THE BEST SEX DOLL FEET GUIDE NOW[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
Think of standing feet as a feature nobody contemplates until they need it, when the difference proves enormous. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. To steer clear of an annoying purchase, comprehend the difference before you order; it's one of the simplest ways.

Metal Bolts Embedded in the Soles
It's a simple difference, at its most basic. Standing feet have metal bolts embedded in the soles, which permit the doll to stand upright without support. If the feet are non-standing, there are no bolts, so the doll can only sit or lie down; stand her and you'll damage the feet. Key to it all are the bolts; everything else follows from whether they're present.

Corners, Doorways and Anywhere Upright
It's standing feet that photography and display can't do without. Photographed in full-length poses without noticeable supports, and displayed in a corner, a doorway or anywhere else that needs her upright: that's what a doll that can stand unaided can do. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the main reason most photographers specify standing feet when ordering.

Showering and Standing Feet
There's shower use as well, which makes standing feet critical. Want to shower with your doll? She has to be able to stand, since lying her down in a shower is impractical and hazardous. Metal bolts ensure that the feet don't absorb water the way non-standing feet would; the standing feet also give her stability in a wet environment. Water absorption in non-standing feet can lead to rust and eventual structural failure, so this is a genuine safety consideration.

Weeks or Months Before the Damage Shows
Let's expand on shower use, because a lot of damaged dolls start there. Inside the ankle of non-standing feet there's foam or filler material that absorbs water when it gets wet. After that, water rusts the metal skeleton inside the leg; you won't see it for weeks or months, and it's fundamentally unfixable once it starts. A doll with non-standing feet should never be in the shower, no matter how careful you are, because the water will find its way in regardless of your precautions.

Noticeable and Accessible Storage
Storage is easier with standing feet in some setups. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. It's a space-efficient choice for purchasers without room for a hanging setup, and a great one for buyers who'd rather display the doll than keep her hidden. Standing feet permit storage that's apparent and accessible, something some customers prefer.

Metal Bolts Add Weight
The cost you pay for standing feet is that they're marginally more pricey and slightly heavier. You'll generally pay a few percent more than for non-standing feet, because the metal bolts add a small quantity of weight and manufacturing is more involved. Small as the difference is, and usually worth the extra cost, it's worth knowing about if you're purchasing on an extremely tight budget.

Not a Reason to Avoid Standing Feet
The other drawback is that the bolts can become noticeable if the feet are bare. In photos, the bolts might show on a doll wearing high-heeled shoes or open-toed footwear, and some buyers find this distracting. You can solve this slight aesthetic issue by covering the feet with closed shoes or choosing footwear that conceals the bolts, so don't steer clear of standing feet entirely because of it.

The Case for Non-Standing Feet
Customers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. Non-standing feet are perfectly sufficient if she'll spend most of her life in a bed or on a sofa, and the money saved can be redirected to articulated hands, a better wig or other upgrades. Where customers know what they want, this is a totally valid choice.

The Tactile Side of Non-Standing Feet
Some buyers find non-standing feet more comfortable to touch, being slightly softer and more pliable. Subtle as it is, and not usually enough to justify the choice on its own, the difference is worth knowing about if you're specifically looking for maximum softness. A hard core inside isn't what you feel in the feet on non-standing dolls; they feel more like the rest of the doll.

Foam in the Ankle Can't Take the Weight
Purchasers forgetting what kind of feet they have and trying to stand the doll regardless is the huge risk with non-standing feet. A usual slip-up, and a damaging one: the doll's weight is too much for the foam inside the ankle, which will tear or collapse. You end up with a doll that can no longer stand even with your support, since the feet have been permanently damaged. If you're buying non-standing feet, remember that they're non-standing, and don't be tempted to test their limits.

Why Retrofitting Doesn't Work Well
And what about retrofitting standing feet to a doll that doesn't have them? The answer, in short, is no, not readily. The original bolts are embedded in the soles during manufacturing, and a subsequently addition requires cutting into the feet and installing new hardware, which is expensive and regularly not as great. When you think you might want standing feet later and you're considering a doll without them, it's better to purchase a doll with standing feet first than try to add them later.

Selecting Between Standing and Non-Standing Feet
If you're picking between standing and non-standing feet, the sensible advice is simple. Standing feet are a must if you plan to photograph the doll, display her standing, or use her in the shower. When you only want to use her in bed or on a sofa, and display doesn't matter to you, non-standing feet are perfectly adequate. If you're not sure, standing feet are the safer alternative, because they don't limit what you can do with the doll and they're worth the small extra cost.

Lying Down Storage Needs More Space
We should mention a gender consideration as well. Heavier, and more hard to store in any other way, male dolls ordinarily benefit from standing feet more than female dolls. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and needs more space. Buyers who don't have a lot of room get a real advantage from standing feet, which give male dolls the ability to store upright.

Harder Soles Because of the Bolts
There's a final note to make on the aesthetic difference between standing and non-standing feet. On standing feet the bottom is marginally harder thanks to the bolts, and that can show when the doll is barefoot. On dolls with delicate features in particular, some purchasers find this less aesthetically satisfying, as the hard soles look marginally industrial. More natural-looking and softer are non-standing feet, which some buyers prefer. If barefoot photos are a priority, factor this trade-off into your decision; it only matters if you're photographing the doll barefoot.

A Quick Routine Check
There's a maintenance angle as well that's worth considering. Bolt security on standing feet needs checking from time to time; a loose one risks the foot or ankle, and a missing one risks the doll collapsing. Use the fitting tool to tighten any bolts that feel loose when you check them by gently twisting them every few months. The issue doesn't arise with non-standing feet, which have no hardware to come loose, making them somewhat lower-maintenance in the long run.

Stability Depends on the Surface
Distinct surfaces mean distinct standing behaviour, and the bolts influence it. The doll is steady on carpet, where the bolts grip well. The doll may need extra support to stay upright when the bolts slip on hard flooring, particularly a silky floor. Hard surface under the feet? Consider a small mat or a grippy pad to prevent sliding. It only concerns standing feet: non-standing feet don't have the issue because the doll isn't standing in the first place, but displaying one on a hard floor makes it worth knowing about.

More Natural-Looking Without the Bolts
The doll's overall proportions are affected by standing feet, a final consideration that's regularly overlooked. Adding a small quantity of length to the foot, the bolts can somewhat change the way the doll looks in barefoot photos. This is a subtle effect, and it's ordinarily invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about specific proportions. Without the bolts, non-standing feet don't have this effect, and the feet are somewhat shorter and more natural-looking.

Posing, Display, Storage and Shower Options
Standing feet are worth the additional cost for most buyers, which is the bottom line, because they open up posing, display, storage and shower choices that non-standing feet don't. You're safe to skip them only when you're certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else should opt for standing feet, which are the better choice and one of the simplest upgrades to justify. More info at this The Complete Primer on Sex Dolls Today- What to Expect d607d3f on top of A Quick Overview of Sex Dolls Right Now- No Hype Just Facts and The Essential Deep Dive Into Sex Dolls- What You Need to Know. Also check out site for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]