[center][/center]

[center][size=large]CLICK FOR BEST SEX DOLL FEET GUIDE TODAY[/size][/center]

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
Standing feet go unconsidered until they're needed, at which point purchasers discover the difference is enormous. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Comprehend the difference before ordering and you'll have steered clear of an annoying purchase in one of the simplest ways possible.

Metal Bolts Embedded in the Soles
Uncomplicated is the basic difference. Metal bolts embedded in the soles of standing feet allow the doll to stand upright without support. Non-standing feet lack these bolts, meaning the doll can only sit or lie down, with damage to the feet if you attempt to stand her. Whether the bolts are present decides everything else; they're the key.

Full-Length Poses Without Visible Supports
Standing feet are what photography and display depend on. Photographed in full-length poses without visible supports, and displayed in a corner, a doorway or anywhere else that needs her upright: that's what a doll that can stand unaided can do. The chief reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.

Showering and Standing Feet
Standing feet are crucial for the shower as well. Standing is the only sensible way to shower with your doll, because lying her down in a shower is impractical and risky. Stability in a wet environment comes from the standing feet, and the metal bolts ensure that the feet don't absorb water the way non-standing feet would. Rust and eventual structural failure can follow from water absorption in non-standing feet, which makes this a genuine safety consideration.

Never Shower a Non-Standing Doll
Shower use deserves more detail, being the source of a lot of damaged dolls. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. Weeks or months pass before the rust the water causes in the metal skeleton inside the leg becomes visible, and it's basically unfixable once it starts. Regardless of your precautions, the water will find its way in, which is why a doll with non-standing feet should never be in the shower nonetheless diligent you are.

Standing Feet Make Storage Easier
Standing feet bring easier storage, too, in some setups. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. A decent alternative for buyers who want to display the doll rather than keep her hidden, this is also space-efficient for those who don't have room for a hanging setup. Noticeable and accessible storage is made possible by the standing feet, which some buyers prefer.

A Few Percent More Expensive
On the drawback, standing feet are a little more expensive and somewhat heavier. You'll generally pay a few percent more than for non-standing feet, because the metal bolts add a small amount of weight and manufacturing is more involved. It's worth knowing about if you're buying on a really tight budget, though the difference is small and normally worth the extra cost.

Not a Reason to Avoid Standing Feet
Another disadvantage is that the bolts can become apparent if the feet are bare. Distracting to some buyers is the possibility that the bolts are noticeable in photos on a doll with high-heeled shoes or open-toed footwear. This trivial aesthetic issue is easily solved by covering the feet with closed shoes or by choosing footwear that hides the bolts; it's no reason to avoid standing feet entirely.

Perfectly Adequate for Many Buyers
You don't need standing feet if you only want to use the doll in bed and don't plan to display her standing or shower with her; non-standing feet are cheaper and lighter. Non-standing feet are perfectly adequate if she'll spend most of her life in a bed or on a sofa, and the money saved can be redirected to articulated hands, a better wig or other upgrades. This is a totally valid choice for buyers who know what they want.

The Tactile Side of Non-Standing Feet
More comfortable to touch, for some purchasers, are non-standing feet, which are somewhat softer and more adaptable. You won't generally opt for on this alone, as it's a subtle difference, but it's worth knowing about if you're specifically looking for maximum softness. Non-standing dolls have feet that feel more like the rest of the doll and less like they have a hard core inside them.

A Doll That Can No Longer Stand
The sizable risk with non-standing feet is that buyers forget what kind of feet they have and try to stand the doll in any case. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's real damage from a widespread oversight. What results is a doll that can't stand any more even with support, as the feet have been permanently damaged. When you buy non-standing feet, remember what they are and don't be tempted to test their limits.

Cutting Into the Feet Is Expensive and Risky
A further question is whether a doll that doesn't have standing feet can have them retrofitted. Not readily; that's the short answer. New hardware has to be installed by cutting into the feet if you add the bolts after that, and it's pricey and regularly doesn't work as well as the original, since the bolts are embedded in the soles during manufacturing. If you might want standing feet later, and you're considering a doll without them, purchasing a doll with standing feet in the first place beats attempting to add them later.

A Simple Decision Guide
If you're choosing between standing and non-standing feet, the practical advice is straightforward. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. If display doesn't matter and you only want to use her in bed or on a sofa, non-standing feet are perfectly sufficient. When in doubt, standing feet win, since they leave every alternative open and cost only a little more.

Pressure on the Body When Lying Down
We should mention a gender consideration as well. Because male dolls are heavier and more difficult to store in any other way, they ordinarily get more from standing feet than female dolls do. Stored lying down, which puts pressure on the body and needs more space, is how a 45kg male doll that can't stand has to be kept. Not having a lot of room? Standing feet give male dolls the ability to store upright, and that's a genuine benefit.

The Aesthetic Difference
There's a final note to make on the aesthetic difference between standing and non-standing feet. Standing feet are marginally harder at the bottom, because of the bolts, and this can be evident when the doll is barefoot. Hard soles look slightly industrial, which some customers find less aesthetically pleasing, particularly on dolls with fragile features. Non-standing feet are softer and more natural-looking, which some purchasers prefer. Photographing the doll barefoot is the only time this trade-off matters, and it's worth factoring into your decision if barefoot photos are a priority.

No Hardware to Come Loose
It's worth considering the maintenance angle as well. Keep an eye on the bolts in standing feet, since a loose bolt can damage the foot or the ankle while a bolt that falls out totally can make the doll collapse. Tighten the bolts with the suitable tool if they feel loose when you check them every few months by gently twisting. Non-standing feet escape this issue because there's no hardware to come loose, which makes them marginally lower-maintenance long term.

Smooth Floors Need Extra Support
The bolts have an effect, too, on how the doll stands on different surfaces. The doll is stable on carpet, where the bolts grip well. The doll may need extra support to stay upright when the bolts slip on hard flooring, particularly a smooth floor. On a hard surface, consider employing a small mat or a grippy pad under the feet to prevent sliding. A doll with non-standing feet isn't standing in the first place, so the issue doesn't arise; for standing feet on a hard floor, it's worth knowing about.

The Final Consideration
Last of all, and frequently overlooked, is how standing feet influence the doll's overall proportions. The bolts add a small amount of length to the foot, which can slightly change the way the doll looks in barefoot photos. If you care about precise proportions and plan to photograph the doll barefoot, this subtle effect, usually invisible in shoes, is worth knowing about. Non-standing feet lack the bolts and therefore this effect, leaving the feet a little shorter and more natural-looking.

Choose Standing Unless You're Certain
Bottom line: for most buyers standing feet are worth the extra cost, opening up posing, display, storage and shower choices that non-standing feet don't. Skip them if, and only if, you're certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are the better choice for everyone else, and one of the simplest upgrades to justify. More info at this rosslink. Also check out click for source as well as click this link here now and pop over to this website for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]