[center][/center]

[center][size=large]CLICK FOR THE BEST SEX DOLL FEET GUIDE NOW[/size][/center]

Standing Feet Vs Non-Standing Feet Explained For Sex Doll Buyers
It's only when buyers need standing feet that they notice them, and the difference is gigantic. The spec sheet gives it a line or less, but it changes what you can do with the doll, how she stores, how she photographs and how she wears over time. Before you order, understand the difference, which is one of the simplest ways to avoid a frustrating purchase.

Bolts or No Bolts
It's a straightforward difference, at its most basic. Standing feet come with metal bolts embedded in the soles, and these allow the doll to stand upright without support. Damage to the feet is the result of attempting to stand a doll with non-standing feet, which don't have these bolts and so only allow sitting or lying down. Everything else follows from whether the bolts are present or not, because the bolts are the key.

Full-Length Poses Without Visible Supports
Photography and display both require standing feet. Unaided standing means full-length poses without visible supports, and display in a corner, a doorway, or anywhere else that requires her to be upright. A wide range of poses and settings that aren't possible with non-standing feet opens up, and that's the principal reason most photographers specify standing feet when ordering.

Water Absorption Leads to Rust
Shower use is another thing for which standing feet are crucial. Showering with your doll requires her to stand; the alternative, lying her down in a shower, is both impractical and dangerous. Unlike non-standing feet, standing feet don't absorb water thanks to the metal bolts, and they give her stability in a wet environment. It's a real safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.

Why Shower Use Destroys So Many Dolls
The shower use point is worth expanding, because it's the source of a lot of damaged dolls. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. From there the water rusts the metal skeleton inside the leg, taking weeks or months to become visible and being basically unfixable once it starts. Showers and non-standing feet don't mix, no matter how careful you are, as the water will find its way in regardless of your precautions.

When You Lack Room for a Hanging Setup
In some setups, a doll with standing feet is also easier to store. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient alternative, and for anyone who wants to display the doll rather than keep her hidden it's a solid one. Storing the doll in a way that's apparent and accessible is possible with standing feet, and some buyers prefer that.

A More Involved Manufacturing Process
Standing feet cost marginally more and weigh slightly more, and that's the disadvantage. Metal bolts add a small quantity of weight to the doll. Manufacturing is also more involved. The upshot is a price that's ordinarily a few percent higher than a doll with non-standing feet. The difference is small, and it's usually worth the extra cost, but it's worth knowing about if you're acquiring on an incredibly tight budget.

Solving the Visible Bolt Problem
The other disadvantage is that the bolts can become noticeable if the feet are bare. If the doll wears high-heeled shoes or open-toed footwear, the bolts might be apparent in photos, which some purchasers find distracting. This minor aesthetic issue is easily solved by covering the feet with closed shoes or by opting for footwear that conceals the bolts; it's no reason to steer clear of standing feet completely.

Putting the Savings Elsewhere
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. A doll that lives mainly in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. Entirely valid is this choice for purchasers who know what they want.

Not Enough to Decide on Its Own
Non-standing feet are a little softer and more pliable too, and some customers find that more comfortable to touch. Not ordinarily enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. Non-standing dolls have feet that feel more like the rest of the doll and less like they have a hard core inside them.

A Common and Costly Mistake
It's the forgetful buyer who trips up on non-standing feet, trying to stand the doll in any case; that's the sizable risk. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's genuine damage from a typical mistake. The feet have been permanently damaged, so the doll can no longer stand even if you attempt to support her. Buying non-standing feet? Remember they're non-standing, and don't be tempted to test their limits.

Bolts Are Embedded During Manufacturing
One more question: can a doll that doesn't have standing feet be fitted with them subsequently? The answer, in short, is no, not easily. Because the bolts are embedded in the soles during manufacturing, adding them later means cutting into the feet and installing new hardware, a costly process that frequently doesn't work as well as the original. If you might want standing feet later, and you're considering a doll without them, purchasing a doll with standing feet in the first place beats trying to add them later.

Photography, Display or Shower: You Need Standing Feet
Direct is the useful advice for buyers choosing between standing and non-standing feet. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. Non-standing feet are perfectly adequate if you only want to use her in bed or on a sofa and you don't care about display. The safer opt for when you're undecided is standing feet; they limit nothing, and the small extra cost is worth it.

Room for Storage Is a Real Concern
One more thing worth mentioning: a gender consideration. Standing feet usually help male dolls more than female dolls, since they're heavier and more difficult to store in any other way. More space and pressure on the body are what a 45kg male doll that can't stand costs you, as he has to be stored lying down. It's a real upside for customers who don't have a lot of room that standing feet let male dolls store upright.

The Aesthetic Difference
Ultimately, the aesthetic difference between standing and non-standing feet is worth noting. The bolts make standing feet marginally harder at the bottom, and this can be visible when the doll is barefoot. The look of the hard soles is slightly industrial, and some buyers find that less aesthetically satisfying, especially on dolls with fragile features. Some buyers prefer the softer, more natural look of non-standing feet. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.

Non-Standing Feet Are Lower-Maintenance
Another angle worth considering is maintenance. Why check periodically? A loose bolt can damage the foot or the ankle, and if one falls out completely the doll can collapse. Use the appropriate tool to tighten any bolts that feel loose when you check them by gently twisting them every few months. Over the long run, non-standing feet need somewhat less maintenance, because they don't have hardware that can come loose.

Hard Flooring Can Be Slippery
The bolts also affect how the doll stands on distinct surfaces. The doll is constant on carpet because the bolts grip well there. Bolts can slip on hard flooring, particularly a silky floor, so the doll may need extra support to stay upright. A small mat or a grippy pad under the feet will avoid sliding on a hard surface, so consider one. Standing feet on a hard floor is the case to know about here, since non-standing feet don't have this issue, the doll not standing in the first place.

Bolts Add a Little Length to the Foot
A final, frequently overlooked, consideration is the effect of standing feet on the doll's overall proportions. Bolts mean a small quantity of extra length in the foot, which can a little change how the doll looks in barefoot photos. You in all likelihood won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about specific proportions. With non-standing feet there are no bolts, so no such effect, and the feet are marginally shorter and more natural-looking.

What Standing Feet Open Up
At the end of the day, standing feet are worth the extra cost for most purchasers, as they open up alternatives for posing, display, storage and the shower that non-standing feet don't. Only customers certain that the doll will stay in bed, never displayed or photographed standing, should skip them. One of the simplest upgrades to justify, standing feet are the better choice for everyone else. More info at this The Complete Breakdown of Sex Dolls Right Now- What to Expect 7d3fba4 as well as A Brutally Honest Rundown of Sex Dolls- The Real Talk bearing in mind A Quick Breakdown of Modern Sex Dolls- The Truth not forgetting sites such as An Honest Lowdown on Sex Dolls- The Honest Breakdown as well as The Only Breakdown of Sex Dolls Today- Read Before You Buy not forgetting sites such as The Only Overview of Sex Dolls- The Honest Breakdown which is worth considering with A Quick Word on Sex Dolls- No Hype Just Facts and don't forget The No-Nonsense Overview of Sex Dolls Right Now- The Real Talk which is worth considering with The Ultimate Breakdown of Modern Sex Dolls- Start Here and A No-BS Primer on Sex Dolls- The Real Talk. Also check out click to find out more as well as click resources and see post for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]