[center]
[/center] [center][size=large]CLICK FOR THE BEST SEX DOLL FEET GUIDE NOW[/size][/center]
Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
Customers hardly ever think about standing feet before they need them, and once they do, the difference turns out to be enormous. On the spec sheet it looks minor, yet it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Understanding the difference before you order is one of the simplest ways to stay away from a frustrating purchase.
Standing Upright Without Support
It's an uncomplicated difference at heart. Embedded in the soles of standing feet, metal bolts let the doll stand upright without support. Damage to the feet is the result of trying to stand a doll with non-standing feet, which don't have these bolts and so only permit sitting or lying down. Everything else flows from the bolts, which are the key, and whether they're present or not.
What Non-Standing Feet Can't Do
When it comes to photography and display, standing feet are important. A doll who can stand unaided can be photographed in full-length poses without noticeable supports and displayed in a corner, a doorway, or wherever else she needs to be upright. Non-standing feet can't match the wide range of poses and settings this opens up, and it's the main reason most photographers specify standing feet when ordering.
If You Want to Shower With Your Doll
For shower use too, standing feet are crucial. Want to shower with your doll? She has to be able to stand, since lying her down in a shower is impractical and risky. The metal bolts ensure that the feet don't absorb water the way non-standing feet would, and the standing feet give her stability in a wet environment. This is a genuine safety consideration; water absorption in non-standing feet can lead to rust and eventual structural failure.
Never Shower a Non-Standing Doll
Worth expanding is the shower use point, as it's the source of a lot of damaged dolls. When it gets wet, the foam or filler material inside the ankle of non-standing feet absorbs water. The water then rusts the metal skeleton inside the leg, which takes weeks or months to become apparent but is fundamentally unfixable once it starts. Showers and non-standing feet don't mix, no matter how attentive you are, as the water will find its way in irrespective of your precautions.
Standing Feet Make Storage Easier
Standing feet are also easier to store in some setups. Upright storage in a corner, a wardrobe, or a storage cabinet is possible for a doll with standing feet, and no hanging hook or storage case is needed. For customers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a decent option. Noticeable and accessible storage is made possible by the standing feet, which some customers prefer.
Is the Premium Worth Paying?
Slightly more pricey and a little heavier: that's the downside of standing feet. Price-wise, a doll with standing feet is typically a few percent higher than one with non-standing feet; the metal bolts add a small amount of weight and manufacturing is more involved. The extra cost is typically worth it and the difference is small, but an extremely tight budget makes it worth knowing about.
The Other Disadvantage: Visible Bolts
Another disadvantage is that the bolts can become apparent if the feet are bare. The bolts might be evident in photos on a doll with high-heeled shoes or open-toed footwear, and some purchasers find that distracting. The trivial aesthetic issue goes away with closed shoes or footwear that hides the bolts, which means it's not a reason to steer clear of standing feet entirely.
A Doll for the Bed or Sofa
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. Articulated hands or a better wig could be paid for with the savings, and non-standing feet are perfectly adequate for a doll who mainly lives in a bed or on a sofa. Completely valid is this choice for buyers who know what they want.
Not Enough to Decide on Its Own
Non-standing feet are marginally softer and more elastic, and some buyers find them more comfortable to touch as a result. You won't generally opt for on this alone, as it's a subtle difference, but it's worth knowing about if you're specifically looking for maximum softness. Non-standing dolls have feet that feel more like the rest of the doll and less like they have a hard core inside them.
Forgetting What Kind of Feet She Has
Forgetting what kind of feet they have, purchasers try to stand the doll anyway, and that's the huge risk with non-standing feet. The foam inside the ankle will tear or collapse under the doll's weight, since it can't support it, so this usual oversight causes real damage. Permanently damaged feet are the cause of a doll that can no longer stand even if you attempt to support her. Acquiring non-standing feet? Remember they're non-standing, and don't be tempted to test their limits.
Cutting Into the Feet Is Expensive and Risky
Then there's the question of whether standing feet can be retrofitted to a doll without them. The short answer is a no, not readily. New hardware has to be installed by cutting into the feet if you add the bolts subsequently, and it's pricey and frequently doesn't work as well as the original, since the bolts are embedded in the soles during manufacturing. Purchase a doll with standing feet in the first place, rather than trying to add them later, if you're considering a doll without them and think you might want them later.
Which Feet Should You Order?
The useful advice on choosing between standing and non-standing feet is straightforward. If any of photographing the doll, displaying her standing, or utilising her in the shower is on the cards, you need standing feet. When you only want to use her in bed or on a sofa, and display doesn't matter to you, non-standing feet are perfectly acceptable. When in doubt, standing feet win, since they leave every option open and cost only a little more.
Why Male Dolls Need Standing Feet More
Another consideration worth mentioning concerns gender. Male dolls tend to upside more than female dolls from standing feet, as they're heavier and more difficult to store in any other way. Stored lying down, which puts pressure on the body and requires more space, is how a 45kg male doll that can't stand has to be kept. Male dolls can store upright with standing feet, which is a genuine advantage for customers who don't have a lot of room.
Harder Soles Because of the Bolts
To finish, the aesthetic difference between standing and non-standing feet is worth noting. With the doll barefoot, the somewhat harder bottom of standing feet, down to the bolts, can be noticeable. Hard soles look marginally industrial, which some buyers find less aesthetically gratifying, particularly on dolls with fragile features. Preferred by some customers, non-standing feet are softer and more natural-looking. If barefoot photos are a priority, factor this trade-off into your decision; it only matters if you're photographing the doll barefoot.
Check Every Few Months by Gently Twisting
Another angle worth considering is maintenance. The bolts in standing feet need a periodic check to confirm they're secure, because the worst case is a bolt falling out entirely and the doll collapsing, with a loose one damaging the foot or ankle on the way there. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the appropriate tool. The issue doesn't arise with non-standing feet, which have no hardware to come loose, making them somewhat lower-maintenance in the long run.
Displaying a Standing Doll on a Hard Floor
How well the doll stands on distinct surfaces depends in part on the bolts. Carpet suits the bolts, which grip well, leaving the doll steady. The doll may need additional support to stay upright on hard flooring, where the bolts can slip, particularly if the floor is silky. To stop sliding on a hard surface, consider a small mat or a grippy pad beneath the feet. Non-standing feet escape this issue, since the doll isn't standing in the first place; plan to display a doll with standing feet on a hard floor, though, and it's worth knowing about.
An Overlooked Detail: Proportions
Ultimately, there's something that's regularly overlooked: how standing feet influence the doll's overall proportions. A small quantity of length is added to the foot by the bolts, which can slightly change the way the doll looks in barefoot photos. If you care about specific proportions and plan to photograph the doll barefoot, this subtle effect, normally invisible in shoes, is worth knowing about. No bolts means no such effect with non-standing feet, whose feet are a little shorter and more natural-looking.
The Bottom Line: Standing Feet Are Worth It
The bottom line is that most buyers get their money's worth from standing feet, because they open up posing, display, storage and shower alternatives that non-standing feet don't. Skipping them is for purchasers certain that bed use is all the doll will get, with no standing display or photography. Standing feet are the better choice for everyone else, and one of the simplest upgrades to justify. More info at this An Honest Look at Modern Sex Dolls- Before You Spend a Penny d607d3f on top of An Honest Overview of Modern Sex Dolls- The Honest Breakdown and A Straight-Up Word on Modern Sex Dolls- Start Here. Also check out check my site on top of check this link right here now and check out your url for more.
[center]
[/center] [center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]