[center][/center]

[center][size=large]CLICK HERE FOR THE BEST SEX DOLL FEET GUIDE NOW[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: Which Should You Choose
Standing feet are one of those features that purchasers don't think about until they need them, and then they discover the difference is enormous. It's a small detail on the spec sheet that changes how she stores, how she photographs, how she wears over time, and what you can do with the doll. To steer clear of a frustrating purchase, grasp the difference before you order; it's one of the simplest ways.

Attempting to Stand Her Will Damage the Feet
It's a simple difference at heart. With standing feet, metal bolts are embedded in the soles, letting the doll stand upright without support. Without these bolts, non-standing feet limit the doll to sitting or lying down, and attempting to stand her will damage the feet. Present or absent, the bolts are the key, and everything else follows.

Why Photographers Specify Standing Feet
Crucial for photography and display: standing feet. A doll that can stand unaided can be photographed in full-length poses without visible supports, and can be displayed in a corner, a doorway, or anywhere else that requires her to be upright. A wide range of poses and settings that aren't possible with non-standing feet opens up, and that's the primary reason most photographers specify standing feet when ordering.

Structural Failure From Water Damage
If you want shower use, standing feet are essential as well. Want to shower with your doll? She has to be able to stand, since lying her down in a shower is impractical and hazardous. A wet environment is no issue for stability with standing feet, and the metal bolts make sure the feet don't absorb water the way non-standing feet would. A genuine safety consideration is at play here: water absorption in non-standing feet can lead to rust and eventual structural failure.

Hidden Rust Inside the Leg
Shower use deserves more detail, being the source of a lot of damaged dolls. Foam or filler material sits inside the ankle of non-standing feet, and it absorbs water when it gets wet. It then rusts the metal skeleton inside the leg, which takes weeks or months to show, and once it's started it's basically unfixable. However diligent you are, keep a doll with non-standing feet out of the shower, because the water will find its way in irrespective of your precautions.

Noticeable and Accessible Storage
Storage is easier with standing feet in some setups. A hanging hook or a storage case isn't needed for a doll with standing feet, who can be stored upright in a corner, a wardrobe, or a storage cabinet. Without room for a hanging setup, this is a space-efficient choice, and for anyone who wants to display the doll rather than keep her hidden it's a good one. Standing feet make apparent and accessible storage possible, which suits some buyers best.

The Extra Cost Explained
The disadvantage of standing feet is that they're marginally more expensive and somewhat heavier. Why the premium? The metal bolts add a small quantity of weight to the doll, manufacturing is more involved, and the price usually ends up a few percent higher than a doll with non-standing feet. It's worth knowing about if you're purchasing on a very tight budget, though the difference is small and normally worth the additional cost.

Bolts Showing When the Feet Are Bare
Visible bolts are the other drawback, if the feet are bare. Some buyers are distracted when the bolts are visible in photos of a doll in high-heeled shoes or open-toed footwear. Steering clear of standing feet completely over this would be unnecessary; it's a trivial aesthetic issue that closed shoes, or footwear that hides the bolts, will solve.

Savings for Articulated Hands or a Better Wig
Non-standing feet are cheaper, lighter, and perfectly fine if the doll will only be used in bed and not displayed standing or taken in the shower. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly acceptable when the doll will mainly be in a bed or on a sofa. Nothing wrong with this choice for customers who know what they want; it's completely valid.

The Tactile Side of Non-Standing Feet
Non-standing feet are slightly softer and more elastic, and some customers find them more comfortable to touch as a result. On its own this subtle difference doesn't normally justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.

Foam in the Ankle Can't Take the Weight
Forgetting what kind of feet they have, customers attempt to stand the doll in any case, and that's the huge risk with non-standing feet. This widespread oversight causes genuine damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. The feet have been permanently damaged, so the doll can no longer stand even if you try to support her. Remember that non-standing feet are non-standing, if you're purchasing them, and don't be tempted to test their limits.

The Short Answer Is No
There's also the question of whether standing feet can be retrofitted to a doll that doesn't have them. In short, no, not readily. Adding the bolts after that needs cutting into the feet and installing new hardware, which is pricey and regularly doesn't work as well as the original, because they're embedded in the soles during manufacturing. You might want them later if you're considering buying a doll without standing feet; in that case, it's better to buy a doll with standing feet in the first place than to try to add them later.

Functional Advice by Use Case
Selecting between standing and non-standing feet? The sensible advice is simple. Should you plan to photograph the doll, display her standing, or use her in the shower, standing feet are what you need. Don't care about display and only want to use her in bed or on a sofa? Non-standing feet are perfectly adequate. Standing feet are the safe default if you can't decide, as they never limit what you can do with the doll and the small extra cost is worth it.

Why Male Dolls Need Standing Feet More
A gender consideration deserves a mention as well. Because male dolls are heavier and more hard to store in any other way, they usually get more from standing feet than female dolls do. Pressure on the body and more space are needed when a 45kg male doll that can't stand has to be stored lying down. The ability to store upright is given to male dolls by standing feet, and that's a genuine advantage for purchasers who don't have a lot of room.

Softer, More Natural Non-Standing Feet
Standing and non-standing feet differ aesthetically, which is worth a final note. Because of the bolts, standing feet are somewhat harder at the bottom, which can be evident when the doll is barefoot. Especially on dolls with delicate features, some customers find the a little industrial look of the hard soles less aesthetically pleasing. Softness and a natural look are what non-standing feet offer, and some buyers prefer them. Only if you're photographing the doll barefoot does this trade-off matter, and it's worth factoring into your decision if barefoot photos are a priority.

A Loose Bolt Can Damage the Foot or Ankle
A maintenance angle deserves consideration too. Why check periodically? A loose bolt can damage the foot or the ankle, and if one falls out totally the doll can collapse. Tighten the bolts with the appropriate tool if they feel loose when you check them every few months by gently twisting. In the long run non-standing feet are somewhat lower-maintenance, since there's no hardware to come loose and so no such issue.

Grip and Stability
How well the doll stands on different surfaces depends in part on the bolts. Carpet is where the bolts grip well and the doll is stable. Especially if the floor is smooth, the bolts can slip on hard flooring, and the doll may need extra support to stay upright. A small mat or a grippy pad under the feet will prevent sliding on a hard surface, so consider one. Non-standing feet escape this issue, since the doll isn't standing in the first place; plan to display a doll with standing feet on a hard floor, though, and it's worth knowing about.

Barefoot Photos and Exact Proportions
Often overlooked, there's a final consideration in how standing feet influence the doll's overall proportions. Somewhat changing the way the doll looks in barefoot photos is a possible effect of the small quantity of length the bolts add to the foot. The effect is subtle and ordinarily invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about specific proportions. Non-standing feet don't have this effect, because they don't have the bolts, so the feet are slightly shorter and more natural-looking.

The Bottom Line: Standing Feet Are Worth It
The extra cost of standing feet is worth it for most purchasers, because they open up posing, display, storage and shower choices that non-standing feet don't; that's the bottom line. Skipping them is for purchasers certain that bed use is all the doll will get, with no standing display or photography. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out why not check here and don't forget source material here and description for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]