[center][/center]

[center][size=large]SEE BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
Nobody gives standing feet an idea until the day they need them, and that's when the enormous difference becomes plain. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Before you order, understand the difference, which is one of the simplest ways to steer clear of an irritating purchase.

Attempting to Stand Her Will Damage the Feet
At its most basic, the difference is uncomplicated. The doll can stand upright without support because standing feet have metal bolts embedded in the soles. Non-standing feet lack these bolts, meaning the doll can only sit or lie down, with damage to the feet if you try to stand her. Whether the bolts are present decides everything else; they're the key.

Necessary for Photography and Display
Photography and display are where standing feet are vital. With a doll that can stand unaided you get full-length poses without visible supports and display in a corner, a doorway, or anywhere else that needs her to be upright. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the primary reason most photographers specify standing feet when ordering.

Showering and Standing Feet
Standing feet are essential for the shower as well. A shower with your doll only works if she can stand, as lying her down in one is both impractical and risky. The metal bolts make sure that the feet don't absorb water the way non-standing feet would, and the standing feet give her stability in a wet environment. Structural failure finally, and rust, can come from water absorption in non-standing feet; that's why this is a real safety consideration.

The Source of a Lot of Damaged Dolls
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. When it gets wet, the foam or filler material inside the ankle of non-standing feet absorbs water. It then rusts the metal skeleton inside the leg, which takes weeks or months to show, and once it's started it's fundamentally unfixable. Irrespective of your precautions, the water will find its way in, which is why a doll with non-standing feet should never be in the shower nevertheless diligent you are.

When You Lack Room for a Hanging Setup
Some setups make standing feet easier to store as well. A corner, a wardrobe or a storage cabinet can hold a doll with standing feet upright, with no need for a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient alternative, and for anyone who wants to display the doll rather than keep her hidden it's a great one. Some purchasers prefer the apparent, accessible storage that the standing feet make possible.

A More Involved Manufacturing Process
On the disadvantage, standing feet are slightly more expensive and slightly heavier. Why the premium? The metal bolts add a small amount of weight to the doll, manufacturing is more involved, and the price usually ends up a few percent higher than a doll with non-standing feet. The extra cost is typically worth it and the difference is small, but an incredibly tight budget makes it worth knowing about.

Bolts Showing When the Feet Are Bare
The other downside is that the bolts can become evident if the feet are bare. Some purchasers find it distracting that the bolts might be visible in photos on a doll with high-heeled shoes or open-toed footwear. Steering clear of standing feet totally over this would be unnecessary; it's a slight aesthetic issue that closed shoes, or footwear that hides the bolts, will solve.

Savings for Articulated Hands or a Better Wig
They're cheaper and lighter, and non-standing feet are fine for purchasers who only want to use the doll in bed and don't plan to display her standing or shower with her. Most of her life in a bed or on a sofa means non-standing feet will be perfectly sufficient, and you can put the savings into other upgrades like articulated hands or a better wig. Where purchasers know what they want, this is an entirely valid choice.

A Subtle Difference
Slightly softer and more pliable, non-standing feet are more comfortable to touch for some buyers. If you're specifically looking for maximum softness it's worth knowing about, even though this is a subtle difference that's not typically enough to justify the choice on its own. Non-standing dolls' feet feel like the rest of the doll more than like they have a hard core inside them.

A Common and Costly Mistake
Buyers sometimes forget what kind of feet they have and attempt to stand the doll in any case, which is the huge risk with non-standing feet. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's real damage from a widespread slip-up. A doll that can no longer stand, even if you try to support her, is the result, because the feet have been permanently damaged. If non-standing feet are what you're buying, remember that they're non-standing and don't test their limits.

Bolts Are Embedded During Manufacturing
And what about retrofitting standing feet to a doll that doesn't have them? Briefly: no, and unquestionably not easily. Adding the bolts afterwards requires cutting into the feet and installing new hardware, which is pricey and regularly doesn't work as well as the original, because they're embedded in the soles during manufacturing. You might want them later if you're considering purchasing a doll without standing feet; in that case, it's better to purchase a doll with standing feet in the first place than to try to add them later.

Choosing Between Standing and Non-Standing Feet
Picking between standing and non-standing feet? The practical advice is direct. You need standing feet if you plan to photograph the doll, display her standing, or use her in the shower. If it's only bed or sofa use you're after, and display is of no concern, non-standing feet are perfectly adequate. Unsure which to pick? The small additional cost of standing feet buys you the safer alternative, with no limit on what the doll can do.

A 45kg Male Doll That Can't Stand
There's also a gender consideration worth mentioning. Standing feet generally help male dolls more than female dolls, since they're heavier and more difficult to store in any other way. More space and pressure on the body are what a 45kg male doll that can't stand costs you, as he has to be stored lying down. Male dolls can store upright with standing feet, which is a genuine upside for buyers who don't have a lot of room.

Visible Hardness at the Bottom
To finish, the aesthetic difference between standing and non-standing feet is worth noting. The bottom of standing feet is marginally harder because of the bolts, something that can be evident when the doll is barefoot. Less aesthetically gratifying, to some purchasers, is this, particularly on dolls with delicate features, as the hard soles look somewhat industrial. The softer and more natural look of non-standing feet is what some buyers prefer. If barefoot photos are a priority, factor this trade-off into your decision; it only matters if you're photographing the doll barefoot.

A Loose Bolt Can Damage the Foot or Ankle
Maintenance is another angle that's worth considering. Standing feet need to be checked periodically to make sure the bolts are secure, because a loose bolt can damage the foot or the ankle, and a bolt that falls out entirely can cause the doll to collapse. If the bolts feel loose when you gently twist them to check, which you should do every few months, tighten them with the suitable tool. Over the long run, non-standing feet need slightly less maintenance, because they don't have hardware that can come loose.

How the Bolts Behave on Different Surfaces
The bolts have an effect, too, on how the doll stands on different surfaces. The bolts grip well on carpet, so the doll is stable. On hard flooring, the bolts can slip, particularly if the floor is smooth, and the doll may need additional support to stay upright. On hard surfaces, a small mat or a grippy pad under the feet is worth considering to avoid sliding. Worth knowing about if you're displaying a doll with standing feet on a hard floor; non-standing feet don't have it, the doll not standing in the first place.

More Natural-Looking Without the Bolts
There's a final consideration that's regularly overlooked, which is how standing feet affect the doll's overall proportions. The bolts add a small amount of length to the foot, which can marginally change the way the doll looks in barefoot photos. This subtle effect, usually invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about exact proportions. Non-standing feet lack the bolts and thus this effect, leaving the feet slightly shorter and more natural-looking.

Who Should Skip Standing Feet
Standing feet are worth the extra cost for most customers, which is the bottom line, because they open up posing, display, storage and shower alternatives that non-standing feet don't. The exception is the buyer who's certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are the better choice for everyone else, and one of the simplest upgrades to justify. More info at this A Quick Word on Modern Sex Dolls- Start Here 85364_7 which is worth considering with The Real Deep Dive Into Sex Dolls Right Now- The Truth and A Brutally Honest Overview of Sex Dolls Right Now- What to Expect. Also check out resource not to mention website not to mention he said which is worth considering with check my source not to mention go to my blog alongside all dig this as well as page not forgetting sites such as sites not to mention my website and click here for more for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]