[center][/center]

[center][size=large]DISCOVER BEST SEX DOLL BEGINNER GUIDE NOW[/size][/center]

A Beginner's Guide To Using A Sex Doll: Everything You Need To Know
So you've purchased your first doll, or you're about to. Whichever it is, there's a brief spell of low-level panic as you unbox a 35 kg silicone human, find yourself standing in the living room, and ask yourself: now what? The answer to that question is what follows here. You will not find fluff or presumptions that you already know here, just hands-on guidance on what you will truly need in your first week and how to dodge pricey errors in your first month. It is worth reading it twice: once before she arrives and once again after, as the second time through makes significantly more sense and lets you area things you skipped over first time round.

Once she's out of the package, shifting her about gets significantly harder, so a few things are worth doing before you even open it. "Somewhere in the bedroom" isn't a plan, so pick a real place: a wardrobe, a corner, or a storage container. The last thing you wish is to be making up storage at 11 p.m. with a bare doll in your arms, seeing as dolls are weighty and unwieldy. Dye transfer is a real risk, so evident the space she'll rest on, which could be a bed, floor, or storage container, and verify it is clean and free of dark blankets, poorly dyed fabrics, and anything else that might release dye. Carpet needs something smooth under her. With a low bed, examine it will not give way under her load with time.

Get your supplies to hand before she arrives:
1. Cornstarch or baby powder (for TPE dolls)
2. A blow-dryer (for freeing up joints)
3. A clean, light-coloured cloth (for the fabric test)
4. A coarse-toothed wig comb (not a standard hairbrush)
5. Drying sticks (for the openings)
6. Mineral oil formulated for TPE (if relevant)
7. A soft make-up brush (for powdering)

None of this is costly, but all of it matters. The complete kit will come to maybe about £20 and it is the variation among a doll that stays in great condition and one that does not. Go attentively opening the package as opposed to tearing into it, and if it is damaged, picture it first, seeing as that is your only cover for a return claim. A quick inspection comes next: verify for tears in the armpits and groin, confirm all fingers are in one piece, and verify the head sculpt matches what you bought. Tell the vendor before you do anything else if something's wrong, and image it straight away, seeing as a claim gets much harder once the doll has been used or repositioned.

Virtually every new buyer is caught off guard by the next component: she will feel inflexible. Tight joints are perfectly regular straight from the factory and do not mean anything is broken. Before you can pose her, you have to limber up the joints, and the technique is straightforward. Use a blow-dryer on a gentle setting, not hot, to soften the TPE around every joint, next steadily move each joint through its entire range of motion, working through the neck, shoulders, elbows, wrists, hips, knees, and ankles. Do not force anything, and if a joint won't move, warm it up certain more. Give this a complete hour. That seems like a lot, but it is the variation between a doll you will in fact pose and a doll that ends up frozen in one pose seeing as you gave up.

Everyone is caught out by how weighty she is compared with how she looks. 35 kg does not seem that heavy up to the point you lift her from a low position and the pressure is concentrated in the wrong places, so use correct lifting technique: squat down and lift with your legs as opposed to your back. Whenever you can, hug her, taking hold under the armpits and keeping her close to your body, seeing as the closer she is to your centre of balance, the less pressure you will feel. Seeing as TPE and silicone both hold body warmth pretty well, she's warmer than you expect, and she'll feel less plastic than you were probably expecting the first time you feel her carefully. This is the chief reason people say their dolls feel alive, not seeing as of movement or AI, but seeing as the fabric truly reacts to feel in a manner that catches you off guard.

TPE gets sticky in time, especially in summer heat or after cleaning, so keep up a regular powdering procedure: a thin layer of cornstarch or baby powder applied with a soft powder brush maintains the finish smooth and clean, and it should be done after each cleansing session. TPE sheds oil in time and needs replenishment, so oil her every so often: a small amount of mineral oil designed specifically for TPE dolls every couple of months maintains the fabric soft and prevents cracks, but don't go overboard, as too much oil makes the exterior oily and picks up attract dust faster than dry skin does.

Consider of cleaning as a regime, not a one-off. After use:
1. Remove any inserts and wash them separately
2. Clean the orifices with warm water and mild detergent
3. Dry everything sensibly with drying stands (15-20 minutes)
4. Powder the exterior with cornstarch or baby powder
5. Put away her the right way

This element isn't optional: skip it and mould will be forming inside her in a few weeks. The complete procedure takes around 45 minutes, which is longer than the majority of people anticipate, and it is the key reason long-term owners switch to detachable inserts, which cut that time just about in half.

The worst slip-up new owners make is not thinking about storage until it's an issue. Most veteran owners hang their dolls, using a heavy-duty ceiling mount rated for at least 60 kg with a dedicated loop, which holds her in one pose without placing pressure on the joints. You can keep her lying down as well, but take maintenance: even surfaces are fine and bumpy ones aren't, and long stretches on her back can press her buttocks or breasts flat, so vary the position now and next. UV damages both TPE and silicone and bleaches wigs and tinted details fast, so never leave her in strong sunlight, and use a cupboard or a covered storage package.

There's no shortage of internet opinions about owning a doll, and most of them are wrong or exaggerated. Yes, she's weighty and her joints need attention, but you needn't be "careful" in the sense of treating her like porcelain, as she's designed to be used and she's not made of glass. You shouldn't feel you have to be sheepish, seeing as huge numbers of people own sex dolls, the industry has grown tremendously in the past decade, and the shame has diminished fast, so if you've chosen to own one, that is a private choice and not a flaw in character.

Nor do you have to treat her like a person. Certain owners build complex characters and personalities for their dolls, which is great and element of the appeal for many people, but you do not have to, and if you just want a doll for physical pleasure and companionship without the roleplay, that is a totally valid way to use one. The only thing you truly need to get right is the everyday side, seeing as everything else is a matter of taste and nobody else has a say on how you use something you purchased.

Each owner ends up with their own regime, and mine, for what that's worth, is easy. Free up the joints before each session, not the whole hour from the first time but just five minutes or so to verify nothing is inflexible, and powder following every clean without exception. Run the cloth check on any new outfits even if you've used the same brand before, keep a backup wig within reach seeing as synthetic hair takes longer to dry out than you'd anticipate and you do not would like to be waiting, and put away her sensibly every time. Nothing here is complex, it is simply the process that maintains your doll in great condition for a long time as opposed to months.

Your first month will teach you the majority of what you should know, and the errors you make early tend to be inexpensive ones provided you're careful. The things that go wrong later are the pricey ones, and they virtually always come down to something skipped in the early weeks. A joint freed up too aggressively, a cloth tested on the doll as opposed to a cloth, a storage solution that seemed fine until the load sunk into it. Go slowly at the beginning and the rest looks after itself.

Something will eventually go wrong, so there's also the question of what to do when it does. Maybe a tear in the armpit, a loose joint, or a dye mark that will not come out. Your instinct will be to panic and assume the doll is wrecked, but virtually everything short of a snapped frame is fixable if you deal with it early. Tiny rips are handled by TPE patch kits, which cost very little. You can tighten or replace loose joints. Stains are the one thing that does not come out, which explains why the cloth check makes such a difference. Learn where the fixable issues are and stop fretting over the ones that aren't.

A doll is a big purchase that deserves careful handling, but "serious" does not mean "difficult." Skip freeing up the joints, regular powdering, and correct storage and you will be replacing her considerably sooner than you expected, but do them and you will get years out of her. After a tough first week, it turns into routine. More info at this rosslink. Also check out you can find out more for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]