http://team-uber.com/forum/

A Candid Overview of Sex Dolls- Start Here
http://team-uber.com/forum/viewtopic.php?f=3&t=2005
Page 1 of 1

Author:  FrankJScott [ Tue Oct 27, 2026 8:33 pm ]
Post subject:  A Candid Overview of Sex Dolls- Start Here

[center]Image[/center]

[center][size=large]DISCOVER BEST SEX DOLL HAND GUIDE HERE[/size][/center]

Sex Doll Hands Compared: Articulated Vs Wired, And Which Is Best
Overlooked at purchase, the hands shortly turn into a persistent source of frustration, usually within weeks. It invariably plays out identically. The doll arrives looking excellent, the customer tries to pose the hands, and the fingers turn out to be stiff, floppy or prone to breaking. The most typical complaint from first-time owners is also completely avoidable, offered you understand the two primary types of hands before you order.

Why Wire Hands Bend So Easily
Cheaper and more prevalent, standard wire hands are the default choice. Built around a thin metal wire in every finger, embedded in supple TPE or silicone, they're designed to bend readily for posing. Being thin enough to be adaptable, the wire lets the fingers be positioned into a variety of shapes, while the pliable material around it gives a natural look. On a light doll there's no complication, and for light use of the hands they're perfectly adequate. On substantial dolls, though, they're problematic.

It's a Matter of When, Not If
The issue with standard wire hands is that the wire doesn't last. There's a limit to how many bends the wire can take before it snaps, after which the finger goes floppy and can't easily be fixed. Enough to break the thin wire inside the finger is the constant pressure of holding a pose, the weight of the doll's arm, or just handling the doll normally over time. Some report damaged fingers within a few months; others report a year or two before the wires fail. It's inevitable either way, with only the timing in question.

Small Pivots, Multiple Bend Points
Next up is the upgrade: articulated hands. They use individual stainless steel finger joints instead of a single wire, and each joint has a small pivot that allows the finger to bend at multiple points. The joints hold a pose without straining the material around them, and the whole thing is much stronger than a wire. Depending on the maker, articulated hands cost ordinarily fifty to a hundred pounds more, but the upgrade is worth it for nearly every buyer. There's a massive difference in durability and poseability.

Fingers That Don't Droop
Poses stay put with articulated hands, which is the first advantage. Each joint of an articulated hand is designed to hold, so it stays in the position you put it, unlike a wire hand, which tends to sag as the wire can't keep tension. No drooping fingers while the doll grips objects, rests her hand on her hip, or holds a photography pose. One of the most expressive parts of any pose is the hands, which makes this a massive benefit for anyone who photographs their doll.

No Wire Fatigue in Stainless Steel Joints
Next upside: durability. Articulated hands don't have the same wire fatigue complication, because the joints are made of stainless steel and the pivots are designed to last. Wire is far less long-lasting than the joints, so snapping risk drops dramatically, but the material around the joints can still wear over time. Wire hands on a 45kg doll are under constant strain and break faster than on a lighter doll, so on a hefty doll this matters even more.

Crisper Finger Shapes
A third advantage: articulated hands look more realistic in poses. An a little rubbery look is standard of bent wire hands, as the wire doesn't support the material properly. Holding the finger shape more crisply, articulated hands give more defined fingers that look less squashed into position. To anyone who knows what to look for, the difference is clear, and photographs make it especially noticeable.

Complete Rather Than Compromised
Making the doll feel more complete is the fourth benefit of articulated hands. The hands are one of the most expressive parts of the body, and a doll with articulated hands can gesture, point, hold, and grip in ways that a wire-handed doll simply can't. This adds a totally new dimension to posing, because the doll can interact with props, hold objects, and create dynamic compositions that wouldn't be possible otherwise. Significant is the advantage for photographers and roleplay enthusiasts.

Tight Budgets and Articulated Hands
Cost is the first drawback of articulated hands. For buyers on a tight budget, these cost more, and the additional fifty to a hundred pounds might be enough to push the total out of range. The upgrade is nearly always worth it in the long run. Replacing a non-working wire hand, or the frustration of floppy fingers, is ordinarily worse than the upfront cost of articulated hands.

Joints Designed to Resist Movement
Second, articulated hands can feel slightly stiffer than wire hands. Holding a pose is the joints' design purpose, so they resist movement more than wire does. You need to put a bit more effort into positioning the fingers, but it's a good thing for posing that the hand stays where you put it. If you're used to wire hands that bend readily, you might find this annoying, as some buyers do. Most purchasers get used to it within a few days; it's a trivial trade-off.

Don't Force Fingers Where They Don't Want to Go
In a different way, articulated hands can be a little more brittle than wire ones; that's the third drawback. Connections between joints and material can now and then come loose despite the joints being strong, and a finger wrenched out of position may pop a joint out, needing reinsertion. Less typical than wire breakage, this still occurs, so know about it before you acquire. Two rules keep you out of trouble: never force a finger into a position it doesn't want to go, and support the hand properly whenever you move it.

Proportions Vary Between Manufacturers
The fourth downside is that articulated hands often run somewhat bigger than wire hands. Chunkier-looking fingers can result from the space the extra joints take up. On smaller dolls the difference can be apparent, even though it's ordinarily minor and most buyers don't notice, and a petite doll with fragile proportions might look somewhat off with articulated hands. A fast question to the seller, whether the articulated hands on a specific doll are scaled proportionally, is worth asking since some manufacturers handle this better than others.

Sensible Advice for Deciding Between Hand Types
It's uncomplicated functional advice for buyers opting for between wire and articulated hands: purchase articulated. The single best upgrade you can make to the doll's functionality is articulated hands, which, though more expensive, save you from broken fingers and drooping poses. Even if you're on an extremely tight budget and don't plan to pose the hands at all, consider whether the savings are worth the inevitable replacement cost, as that's the only case for wire hands.

When Replacement Articulated Hands Make Sense
There's also the question of what to do if you already have a doll with wire hands and the fingers break. Some cases are repairable, which is the good news; you push a new wire through the finger, or use a small quantity of TPE repair compound to reinforce the joint. What lets it down is quality, since repairs rarely equal the original, and a few months is about all you should expect before the finger goes again. Repairing wire hands is ordinarily a worse bet than a replacement pair of articulated ones for anyone committed to keeping the doll long-term.

Lubricating the Joints
With articulated hands comes a maintenance consideration worth knowing about. The joints need to be kept clean and dry, because moisture can cause the metal to corrode and the joints to seize up. Once you've finished with the doll, wipe the hands down and dry them fully, especially if she's been in contact with water or cleaning goods. A dab of silicone-based lubricant on the joints, every few months, does two jobs: it keeps them moving smoothly and prevents the metal grinding against the surrounding material.

Ongoing Material vs Concealed Joints
Let's say a few words on how the two hand types differ visually. The continuity of the material around the wire makes wire hands look slightly smoother and softer. Articulated hands show joint lines, and some customers find them less aesthetically pleasing. They're generally hid under a thin layer of material, but when the fingers bend the joints can be visible; if you care about visual realism, that's a trade-off to know about. In intricate poses they look more like real hands, which is often enough to justify the trade-off.

The Bottom Line: Articulated Hands Win
At the end of the day, articulated hands are almost invariably the better choice. They're tougher, easier to pose and more realistic in photos, and the additional cost is small compared to the frustration of broken fingers. Specify articulated hands in the order if you're buying a new doll. If you're purchasing a used doll, check whether it has articulated hands and factor that into the cost. Many times over, the upgrade pays for itself; that's true either way. More info at this rosslink. Also check out my review here for more.
[center]Image[/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/