[center][/center]

[center][size=large]SEE THE BEST SEX DOLL FEET GUIDE TODAY[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
Standing feet are one of those features that customers don't think about until they need them, and then they discover the difference is vast. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Get to grips with the difference before you order and you've taken one of the simplest steps towards evading an irritating purchase.

Why Non-Standing Dolls Can Only Sit or Lie Down
The difference comes down to something simple. Metal bolts embedded in the soles of standing feet permit the doll to stand upright without support. If the feet are non-standing, there are no bolts, so the doll can only sit or lie down; stand her and you'll damage the feet. Are the bolts there or not? That's the key, and everything else follows from it.

Display Possibilities With Standing Feet
Standing feet are a must for photography and display. Standing unaided, she can be photographed in full-length poses without visible supports, and displayed in a corner, a doorway, or any other spot that needs her to be upright. The main reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.

Metal Bolts Keep Water Out of the Feet
For shower use too, standing feet are necessary. She needs to stand if the plan is a shower together, because a doll lying down in a shower is impractical and unsafe. A wet environment is no difficulty for stability with standing feet, and the metal bolts ensure the feet don't absorb water the way non-standing feet would. Water absorption in non-standing feet can lead to rust and eventual structural failure, so this is a genuine safety consideration.

Essentially Unfixable Once It Starts
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. Foam or filler material absorbs water when it gets wet, and non-standing feet have that material inside the ankle. Water rusting the metal skeleton inside the leg takes weeks or months to become apparent, yet once it starts it's fundamentally unfixable. Attentive or not, a doll with non-standing feet should never be in the shower; the water will find its way in whatever precautions you take.

When You Lack Room for a Hanging Setup
In some setups, a doll with standing feet is also easier to store. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. It's a space-efficient alternative for buyers without room for a hanging setup, and a great one for purchasers who'd rather display the doll than keep her hidden. Storing the doll in a way that's noticeable and accessible is possible with standing feet, and some customers prefer that.

The Disadvantage: Somewhat Pricier and Heavier
On the downside, standing feet are a little more costly and somewhat heavier. Expect the price to be a few percent higher than a doll with non-standing feet, as the metal bolts add a small amount of weight and the manufacturing process is more involved. Small as the difference is, and generally worth the additional cost, it's worth knowing about if you're acquiring on an extremely tight budget.

Bolts Showing When the Feet Are Bare
There's another downside: the bolts can become noticeable if the feet are bare. Some customers find it distracting that the bolts might be evident in photos on a doll with high-heeled shoes or open-toed footwear. It's a slight aesthetic issue, solved by covering the feet with closed shoes or opting for footwear that hides the bolts, and not a reason to avoid standing feet totally.

A Completely Valid Choice
You don't need standing feet if you only want to use the doll in bed and don't plan to display her standing or shower with her; non-standing feet are cheaper and lighter. Where most of her life will be spent in a bed or on a sofa, non-standing feet are perfectly adequate and leave money for upgrades like articulated hands or a better wig. A completely valid choice, this, for customers who know what they want.

No Hard Core Inside
The softer, more flexible feel of non-standing feet, minor as it is, is more comfortable to touch for some purchasers. On its own this subtle difference doesn't normally justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. Non-standing dolls' feet feel like the rest of the doll more than like they have a hard core inside them.

Remember They're Non-Standing
Buyers now and then forget what kind of feet they have and try to stand the doll anyway, which is the big risk with non-standing feet. A usual slip-up, and a damaging one: the doll's weight is too much for the foam inside the ankle, which will tear or collapse. Result: permanently damaged feet, and a doll that can no longer stand, even with your support. Keep in mind that non-standing feet are non-standing, if that's what you're buying, and don't be tempted to test their limits.

Decide Before You Order
You might also ask whether standing feet can be retrofitted to a doll that doesn't have them. The answer, in short, is no, not easily. During manufacturing the bolts are embedded in the soles; doing it later means cutting into the feet and installing new hardware, which is costly and regularly doesn't work as well as the original. If you're considering purchasing a doll without standing feet, and you think you might want them later, it's better to purchase a doll with standing feet in the first place than to try to add them later.

The Safer Option
If you're opting for between standing and non-standing feet, the functional advice is direct. You'll need standing feet for photographing the doll, displaying her standing, or utilising her in the shower. Non-standing feet are perfectly sufficient if you only want to use her in bed or on a sofa and you don't care about display. If you're on the fence, go with standing feet, the safer choice, because nothing is ruled out and the small additional cost is worth paying.

Weight and Storage Together
Gender plays a part too, and it's worth mentioning. Standing feet advantage male dolls more than female dolls in general, as they're heavier and harder to store any other way. Stored lying down, which puts pressure on the body and needs more space, is how a 45kg male doll that can't stand has to be kept. Purchasers who don't have a lot of room get a genuine benefit from standing feet, which give male dolls the ability to store upright.

Industrial-Looking Soles on Delicate Dolls
Standing and non-standing feet differ aesthetically, which is worth a final note. A little harder at the bottom is how standing feet are, because of the bolts, and it can be noticeable when the doll is barefoot. Some buyers find this less aesthetically pleasing, particularly on dolls with delicate features, because the hard soles look slightly industrial. Softness and a natural look are what non-standing feet offer, and some customers prefer them. The trade-off only matters if you're photographing the doll barefoot; if barefoot photos are a priority, it's worth factoring into your decision.

A Quick Routine Check
A maintenance angle deserves consideration too. Keep an eye on the bolts in standing feet, since a loose bolt can damage the foot or the ankle while a bolt that falls out totally can make the doll collapse. Every few months, give the bolts a mild twist to check them, and tighten them with the suitable tool if they feel loose. In the long run non-standing feet are marginally lower-maintenance, since there's no hardware to come loose and so no such issue.

Carpet Grips Well
The bolts also influence how the doll stands on distinct surfaces. On carpet, the doll is constant, the bolts gripping well. Slipping bolts on hard flooring, especially if the floor is silky, can mean the doll needs additional support to stay upright. Sliding is avoided on a hard surface by a small mat or a grippy pad under the feet, which you should consider. The doll isn't standing in the first place with non-standing feet, so there's no issue there; with standing feet on a hard floor, it's worth knowing about.

The Final Consideration
A final, frequently overlooked, consideration is the effect of standing feet on the doll's overall proportions. Bolts mean a small amount of additional length in the foot, which can marginally change how the doll looks in barefoot photos. Planning to photograph the doll barefoot and caring about exact proportions? This subtle effect, ordinarily invisible in shoes, is worth knowing about. Non-standing feet lack the bolts and hence this effect, leaving the feet slightly shorter and more natural-looking.

What Standing Feet Open Up
Bottom line: for most customers standing feet are worth the additional cost, opening up posing, display, storage and shower choices that non-standing feet don't. Certain the doll will only ever be used in bed, and never displayed or photographed standing? Then skip them. Nobody else should. Standing feet are better for everyone else, and they're among the simplest upgrades to justify. More info at this A Candid Primer on Sex Dolls Right Now- The Truth d607d3f bearing in mind The Definitive Overview of Modern Sex Dolls- What Nobody Tells You and The Definitive Primer on Sex Dolls Today- What You Need to Know. Also check out useful site for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]