[center][/center]

[center][size=large]DISCOVER THE BEST SEX DOLL FEET GUIDE TODAY[/size][/center]

Standing Feet Vs Non-Standing Feet: What The Difference Means
Few buyers think about standing feet beforehand, yet the difference, once they need them, is vast. On the spec sheet it looks trivial, yet it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. If you grasp the difference before you order, you've steered clear of an irritating purchase in one of the simplest ways there is.

What Makes a Foot a Standing Foot
It's a straightforward difference at heart. Standing feet come with metal bolts embedded in the soles, and these allow the doll to stand upright without support. If the feet are non-standing, there are no bolts, so the doll can only sit or lie down; stand her and you'll damage the feet. Present or absent, the bolts are the key, and everything else follows.

Full-Length Poses Without Visible Supports
It's standing feet that photography and display can't do without. With a doll that can stand unaided you get full-length poses without noticeable supports and display in a corner, a doorway, or anywhere else that needs her to be upright. A wide range of poses and settings that aren't possible with non-standing feet opens up, and that's the principal reason most photographers specify standing feet when ordering.

Metal Bolts Keep Water Out of the Feet
In the shower, too, standing feet are necessary. A shower with your doll only works if she can stand, as lying her down in one is both impractical and risky. Standing feet make her stable in a wet environment, and with the metal bolts the feet don't absorb water as non-standing feet would. Structural failure eventually, and rust, can come from water absorption in non-standing feet; that's why this is a real safety consideration.

Why Shower Use Destroys So Many Dolls
A lot of damaged dolls come from shower use, so the point is worth expanding. Non-standing feet contain foam or filler material inside the ankle, and wet conditions make that material absorb water. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become visible but is essentially unfixable once it starts. Careful or not, a doll with non-standing feet should never be in the shower; the water will find its way in whatever precautions you take.

Space-Efficient Storage
Another advantage of standing feet is easier storage in some setups. A doll with standing feet can be stored upright in a corner, a wardrobe, or a storage cabinet without needing a hanging hook or a storage case. Buyers who want to display the doll rather than keep her hidden will find this a solid choice, and it's space-efficient if you don't have room for a hanging setup. The standing feet make it possible to store the doll in a way that's visible and accessible, which some buyers prefer.

A More Involved Manufacturing Process
Standing feet cost somewhat more and weigh a little more, and that's the drawback. Expect the price to be a few percent higher than a doll with non-standing feet, as the metal bolts add a small amount of weight and the manufacturing process is more involved. It's worth knowing about if you're buying on an extremely tight budget, though the difference is small and normally worth the additional cost.

Selecting Footwear That Conceals Them
Bare feet can make the bolts evident, which is the other downside. With high-heeled shoes or open-toed footwear, the bolts might be visible in photos, something some purchasers find distracting. This slight aesthetic issue is readily solved by covering the feet with closed shoes or by picking footwear that conceals the bolts; it's no reason to avoid standing feet totally.

Non-Standing Feet: Cheaper and Lighter
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. Where most of her life will be spent in a bed or on a sofa, non-standing feet are perfectly sufficient and leave money for upgrades like articulated hands or a better wig. This choice is totally valid for customers who know what they want.

No Hard Core Inside
The softer, more flexible feel of non-standing feet, small as it is, is more comfortable to touch for some customers. Specifically looking for maximum softness? Then this subtle difference, though not generally enough to justify the choice on its own, is worth knowing about. A hard core inside isn't what you feel in the feet on non-standing dolls; they feel more like the rest of the doll.

Forgetting What Kind of Feet She Has
Buyers forgetting what kind of feet they have and attempting to stand the doll regardless is the huge risk with non-standing feet. Tear or collapse is what the foam inside the ankle does under the doll's weight, which is why this usual error causes real damage. The feet have been permanently damaged, so the doll can no longer stand even if you try to support her. You're acquiring non-standing feet? Remember it, and don't be tempted to test their limits.

Adding Bolts Afterwards
And what about retrofitting standing feet to a doll that doesn't have them? The answer, in short, is no, not easily. Cutting into the feet and installing new hardware is what adding the bolts later requires, which is expensive and often doesn't work as well as the original; the bolts are embedded in the soles during manufacturing. If you're considering buying a doll without standing feet, and you think you might want them later, it's better to acquire a doll with standing feet in the first place than to try to add them later.

Which Feet Should You Order?
If you're selecting between standing and non-standing feet, the functional advice is simple. For photographing the doll, displaying her standing, or using her in the shower, you need standing feet. When you only want to use her in bed or on a sofa, and display doesn't matter to you, non-standing feet are perfectly adequate. If you're not sure, standing feet are the safer choice, because they don't limit what you can do with the doll and they're worth the small extra cost.

Room for Storage Is a Real Concern
There's also a gender consideration worth mentioning. Because they're heavier and more difficult to store in any other way, male dolls generally upside from standing feet more than female dolls. Stored lying down, which puts pressure on the body and requires more space, is how a 45kg male doll that can't stand has to be kept. Male dolls can store upright with standing feet, which is a real upside for purchasers who don't have a lot of room.

What Barefoot Photos Reveal
A final note is worth making on the aesthetic difference between standing and non-standing feet. With the doll barefoot, the slightly harder bottom of standing feet, down to the bolts, can be evident. On dolls with fragile features in particular, some buyers find this less aesthetically pleasing, as the hard soles look slightly industrial. Non-standing feet are more natural-looking and softer, something some customers prefer. This trade-off only matters when you're photographing the doll barefoot, so factor it into your decision if barefoot photos are a priority.

Check Every Few Months by Gently Twisting
One more angle worth considering: maintenance. The bolts in standing feet need a periodic check to confirm they're secure, because the worst case is a bolt falling out completely and the doll collapsing, with a loose one damaging the foot or ankle on the way there. Check every few months, by gently twisting the bolts, and tighten with the appropriate tool whichever feel loose. Non-standing feet don't have this issue, because there's no hardware to come loose, which makes them slightly lower-maintenance in the long run.

A Small Mat or Grippy Pad
How the doll stands on distinct surfaces is also impacted by the bolts. Carpet is where the bolts grip well and the doll is stable. Extra support to stay upright may be needed on hard flooring, as the bolts can slip, especially on a silky floor. Think about a small mat or a grippy pad under the feet when she's on a hard surface, as it stops sliding. Standing feet on a hard floor is the case to know about here, since non-standing feet don't have this issue, the doll not standing in the first place.

How Standing Feet Change the Look
One final consideration, frequently overlooked, is how standing feet influence the doll's overall proportions. A little changing the way the doll looks in barefoot photos is a possible effect of the small quantity of length the bolts add to the foot. If you care about specific proportions and plan to photograph the doll barefoot, this subtle effect, usually invisible in shoes, is worth knowing about. With non-standing feet there are no bolts, so no such effect, and the feet are slightly shorter and more natural-looking.

Who Should Skip Standing Feet
The bottom line is that most purchasers get their money's worth from standing feet, because they open up posing, display, storage and shower choices that non-standing feet don't. Only purchasers certain that the doll will stay in bed, never displayed or photographed standing, should skip them. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this The No-Nonsense Breakdown of Sex Dolls Today- Before You Spend a Penny 4f25b75 on top of A Quick Primer on Sex Dolls- The Stuff That Matters and A No-BS Overview of Sex Dolls Today- Read Before You Buy. Also check out hop over to this site which is worth considering with source material here and click this link here now for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]