[center][/center]

[center][size=large]VIEW BEST SEX DOLL FEET GUIDE NOW[/size][/center]

What Are Standing Feet? Standing Vs Non-Standing Feet Explained
You won't think about standing feet until you need them, and then you'll find the difference is gigantic. Don't let the spec sheet fool you; this small detail changes what you can do with the doll, how she stores, how she photographs, and how she wears over time. One of the simplest ways to steer clear of an annoying purchase is to grasp the difference before you order.

Standing Upright Without Support
There's a simple basic difference. What lets the doll stand upright without support is the metal bolts embedded in the soles of standing feet. No bolts in non-standing feet means the doll can only sit or lie down, and attempting to stand her will damage the feet. Having the bolts or not is the key, and everything else follows from that.

Corners, Doorways and Anywhere Upright
Photography and display both require standing feet. A doll who can stand unaided can be photographed in full-length poses without noticeable supports and displayed in a corner, a doorway, or wherever else she needs to be upright. Non-standing feet can't match the wide range of poses and settings this opens up, and it's the principal reason most photographers specify standing feet when ordering.

Water Absorption Leads to Rust
There's shower use as well, which makes standing feet essential. She needs to stand if the plan is a shower together, because a doll lying down in a shower is impractical and risky. Unlike non-standing feet, standing feet don't absorb water thanks to the metal bolts, and they give her stability in a wet environment. Structural failure finally, and rust, can come from water absorption in non-standing feet; that's why this is a genuine safety consideration.

Hidden Rust Inside the Leg
Worth expanding is the shower use point, as it's the source of a lot of damaged dolls. The ankle of a non-standing foot contains foam or filler material, which absorbs water when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become noticeable but is fundamentally unfixable once it starts. A doll with non-standing feet shouldn't ever be in the shower: the water will find its way in anyway of your precautions, no matter how careful you are.

Display Rather Than Hide
Easier storage is another thing standing feet offer in some setups. A hanging hook or a storage case isn't needed for a doll with standing feet, who can be stored upright in a corner, a wardrobe, or a storage cabinet. Purchasers who want to display the doll rather than keep her hidden will find this a good option, and it's space-efficient if you don't have room for a hanging setup. Noticeable and accessible storage is made possible by the standing feet, which some buyers prefer.

Weight and Price Trade-Offs
The disadvantage of standing feet is that they're marginally more expensive and a little heavier. Price-wise, a doll with standing feet is generally a few percent higher than one with non-standing feet; the metal bolts add a small quantity of weight and manufacturing is more involved. It's worth knowing about if you're buying on a really tight budget, though the difference is small and usually worth the extra cost.

Bolts Showing When the Feet Are Bare
Another disadvantage is that the bolts can become noticeable if the feet are bare. In photos, the bolts might show on a doll wearing high-heeled shoes or open-toed footwear, and some customers find this distracting. Cover the feet with closed shoes or choose footwear that conceals the bolts and this minor aesthetic issue is solved, so it's not a reason to stay away from standing feet completely.

A Doll for the Bed or Sofa
Non-standing feet cost less and weigh less, and they suit buyers who only want to use the doll in bed and won't display her standing or shower with her. Non-standing feet are perfectly enough if she'll spend most of her life in a bed or on a sofa, and the money saved can be redirected to articulated hands, a better wig or other upgrades. Completely valid is this choice for purchasers who know what they want.

A Subtle Difference
There's a slight softness and flexibility to non-standing feet that some customers find more comfortable to touch. A subtle difference, not generally enough to justify the choice on its own, this is still worth knowing about if you're specifically looking for maximum softness. Feeling more like the rest of the doll, and less like they have a hard core inside them, are the feet on non-standing dolls.

Remember They're Non-Standing
With non-standing feet the big risk is buyers forgetting what kind of feet they have, then attempting to stand the doll in any case. Expect real damage from this widespread oversight, because the foam inside the ankle can't support the doll's weight and will tear or collapse. The result is a doll that can no longer stand even if you attempt to support her, because the feet have been permanently damaged. Don't be tempted to test their limits if you're buying non-standing feet; remember that they're non-standing.

Adding Bolts Afterwards
Another question is whether standing feet can be retrofitted to a doll that doesn't have them. To put it briefly, not readily, no. New hardware has to be installed by cutting into the feet if you add the bolts afterwards, and it's costly and regularly doesn't work as well as the original, since the bolts are embedded in the soles during manufacturing. Buy a doll with standing feet in the first place, rather than attempting to add them later, if you're considering a doll without them and think you might want them later.

Standing Feet Don't Limit What You Can Do
Selecting between standing and non-standing feet? The practical advice is direct. Should you plan to photograph the doll, display her standing, or use her in the shower, standing feet are what you need. If it's only bed or sofa use you're after, and display is of no concern, non-standing feet are perfectly adequate. Not sure? Choose standing feet: nothing is off the table with them, and the small extra cost is worth paying.

A Gender Consideration
One more thing worth mentioning: a gender consideration. Because they're heavier and more difficult to store in any other way, male dolls generally advantage from standing feet more than female dolls. If a 45kg male doll can't stand, he has to be stored lying down, which puts pressure on the body and needs more space. Customers who don't have a lot of room get a genuine benefit from standing feet, which give male dolls the ability to store upright.

A Final Note on Appearance
Ultimately, the aesthetic difference between standing and non-standing feet is worth noting. On standing feet the bottom is marginally harder thanks to the bolts, and that can show when the doll is barefoot. The look of the hard soles is somewhat industrial, and some purchasers find that less aesthetically gratifying, particularly on dolls with fragile features. The softer and more natural look of non-standing feet is what some customers prefer. Only if you're photographing the doll barefoot does this trade-off matter, and it's worth factoring into your decision if barefoot photos are a priority.

Tighten With the Appropriate Tool
It's worth considering the maintenance angle as well. Standing feet need to be checked periodically to make sure the bolts are secure, because a loose bolt can damage the foot or the ankle, and a bolt that falls out totally can cause the doll to collapse. By gently twisting the bolts every few months you can check them, and if they feel loose, use the fitting tool to tighten them. There's no hardware to come loose with non-standing feet, so they don't have this issue and are somewhat lower-maintenance in the long run.

Displaying a Standing Doll on a Hard Floor
How well the doll stands on different surfaces depends in part on the bolts. Carpet is where the bolts grip well and the doll is constant. Hard flooring can make the bolts slip, particularly if the floor is smooth, so the doll may need additional support to stay upright. A small mat or a grippy pad under the feet will prevent sliding on a hard surface, so consider one. Standing feet on a hard floor is the case to know about here, since non-standing feet don't have this issue, the doll not standing in the first place.

Non-Standing Feet Are Slightly Shorter
One final consideration, frequently overlooked, is how standing feet affect the doll's overall proportions. A small quantity of length is added to the foot by the bolts, which can marginally change the way the doll looks in barefoot photos. It's a subtle effect that's ordinarily invisible in shoes, yet worth knowing about for barefoot photography when you care about exact proportions. With non-standing feet there are no bolts, so no such effect, and the feet are marginally shorter and more natural-looking.

Bed-Only Dolls Don't Need Them
The bottom line is that standing feet are worth the additional cost for most customers, because they open up posing, display, storage, and shower choices that non-standing feet don't. The only buyers who should skip them are those who are certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are better for everyone else, and they're among the simplest upgrades to justify. More info at this rosslink. Also check out my sources and don't forget click this over here now which is worth considering with this and don't forget look at here now as well as find more alongside all you can find out more bearing in mind informative post together with blog here together with index and see it here for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]