[center][/center]

[center][size=large]CLICK FOR BEST SEX DOLL FEET GUIDE TODAY[/size][/center]
Standing Feet Or Non-Standing Feet? The Differences Explained
It's only when purchasers need standing feet that they notice them, and the difference is gigantic. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Understanding the difference before you order is one of the simplest ways to steer clear of a frustrating purchase.

Why Non-Standing Dolls Can Only Sit or Lie Down
The core difference is a simple one. Without support, a doll with standing feet can stand upright, thanks to the metal bolts embedded in the soles. These bolts are absent from non-standing feet, so the doll can only sit or lie down, and attempting to stand her will damage the feet. The key is the bolts, and everything else follows from whether they're there.

Standing Unaided
Necessary for photography and display: standing feet. A doll who can stand unaided can be photographed in full-length poses without noticeable supports and displayed in a corner, a doorway, or wherever else she needs to be upright. With standing feet, a wide range of poses and settings opens up that non-standing feet can't match; it's the primary reason most photographers specify them when ordering.

Water Absorption Leads to Rust
If you want shower use, standing feet are crucial as well. Lying her down in a shower is impractical and dangerous, so showering with your doll means she needs to stand. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. This is a genuine safety consideration, because water absorption in non-standing feet can lead to rust and eventual structural failure.

Never Shower a Non-Standing Doll
Expanding on the shower use point is worthwhile; it's the source of a lot of damaged dolls. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. Weeks or months pass before the rust the water causes in the metal skeleton inside the leg becomes evident, and it's essentially unfixable once it starts. The water will find its way in regardless of your precautions, so a doll with non-standing feet should never be in the shower, no matter how cautious you are.

Upright in a Corner, Wardrobe or Cabinet
In some setups, a doll with standing feet is also easier to store. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. A good choice for buyers who want to display the doll rather than keep her hidden, this is also space-efficient for those who don't have room for a hanging setup. Some purchasers prefer the apparent, accessible storage that the standing feet make possible.

Is the Premium Worth Paying?
The disadvantage of standing feet is that they're a little more expensive and a little heavier. A more involved manufacturing process plus a small amount of weight from the metal bolts means a price generally a few percent above a doll with non-standing feet. Though the difference is small and it's usually worth the additional cost, knowing about it matters if you're purchasing on an extremely tight budget.

A Minor Aesthetic Issue
If the feet are bare, the bolts can become evident; that's the other downside. Some buyers are distracted when the bolts are visible in photos of a doll in high-heeled shoes or open-toed footwear. This is a minor aesthetic issue, and it can be solved by covering the feet with closed shoes or by opting for footwear that hides the bolts, so it's not a reason to steer clear of standing feet completely.

Know What You Want
Non-standing feet are cheaper and lighter, and they're fine for buyers who only want to use the doll in bed and don't plan to display her standing or shower with her. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly acceptable when the doll will largely be in a bed or on a sofa. It's an entirely valid choice if you know what you want.

No Hard Core Inside
Some buyers find non-standing feet more comfortable to touch, being somewhat softer and more pliable. Not typically enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. The feet on non-standing dolls feel more like the rest of the doll and less like they have a hard core inside them.

Foam in the Ankle Can't Take the Weight
Buyers now and then forget what kind of feet they have and try to stand the doll anyway, which is the big risk with non-standing feet. This is a usual slip-up, and it causes genuine damage, because the foam inside the ankle can't support the doll's weight and will tear or collapse. Permanently damaged feet are the cause of a doll that can no longer stand even if you attempt to support her. Non-standing feet should be remembered as non-standing, and their limits shouldn't be tested.

New Hardware Rarely Works as Well
Also worth asking is whether standing feet can be retrofitted to a doll that lacks them. No, not easily, is the short answer. Manufacturing is when the bolts get embedded in the soles; subsequently, you'd have to cut into the feet and install new hardware, which is expensive and frequently doesn't work as well as the original. If you're considering buying a doll without standing feet, and you think you might want them later, it's better to buy a doll with standing feet in the first place than to attempt to add them later.

Bed or Sofa Only: Non-Standing Is Fine
For purchasers who are selecting between standing and non-standing feet, the practical advice is uncomplicated. If you plan to photograph the doll, display her standing, or use her in the shower, you need standing feet. If it's only bed or sofa use you're after, and display is of no concern, non-standing feet are perfectly enough. Standing feet are the safe default if you can't decide, as they never limit what you can do with the doll and the small extra cost is worth it.

A Gender Consideration
It's worth mentioning a gender consideration too. Heavier, and more challenging to store in any other way, male dolls typically upside from standing feet more than female dolls. More space and pressure on the body are what a 45kg male doll that can't stand costs you, as he has to be stored lying down. The ability to store upright is given to male dolls by standing feet, and that's a real advantage for buyers who don't have a lot of room.

Harder Soles Because of the Bolts
Finally, the aesthetic difference between standing and non-standing feet is worth noting. Standing feet are a little harder at the bottom, because of the bolts, and this can be noticeable when the doll is barefoot. The look of the hard soles is slightly industrial, and some customers find that less aesthetically pleasing, especially on dolls with delicate features. Some customers prefer the softer, more natural look of non-standing feet. Photographing the doll barefoot is the only time this trade-off matters, and it's worth factoring into your decision if barefoot photos are a priority.

No Hardware to Come Loose
Maintenance is another angle that's worth considering. Secure bolts matter: loose ones can damage the foot or the ankle, a bolt that falls out can cause a collapse, and so standing feet need periodic checking. Check the bolts every few months by gently twisting them, and if they feel loose, tighten them with the fitting tool. Marginally lower-maintenance in the long run, non-standing feet don't have this issue as there's no hardware to come loose.

Silky Floors Need Extra Support
The bolts have an effect, too, on how the doll stands on distinct surfaces. The doll is constant on carpet, where the bolts grip well. The doll may need additional support to stay upright when the bolts slip on hard flooring, especially a smooth floor. On a hard surface, consider employing a small mat or a grippy pad under the feet to avoid sliding. Non-standing feet escape this issue, since the doll isn't standing in the first place; plan to display a doll with standing feet on a hard floor, though, and it's worth knowing about.

How Standing Feet Change the Look
Frequently overlooked, there's a final consideration in how standing feet impact the doll's overall proportions. Barefoot photos can look marginally different because the bolts add a small quantity of length to the foot. This subtle effect, usually invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about specific proportions. Marginally shorter and more natural-looking, non-standing feet don't have this effect, since they don't have the bolts.

What Standing Feet Open Up
The bottom line is that standing feet are worth the extra cost for most purchasers, because they open up posing, display, storage, and shower options that non-standing feet don't. Certain the doll will only ever be used in bed, and never displayed or photographed standing? Then skip them. Nobody else should. Everyone else should opt for standing feet, which are the better choice and one of the simplest upgrades to justify. More info at this 07d3fba on top of and #crosslink. Also check out look at this now for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]